Insulating Double-Wide Skirting

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
moshiersr

moshiersr

Member
Jan 23, 2008
70
Horseheads NY
So I want to insulate the skirting around my doublewide manufactured home.. The floors already have 6" of fiberglass in them, but I want to stop the wind from getting under it in the winter (vented skirting, will remove some insulation in the summer to prevent moisture problems..) and to try cut down on drafts through the floor registers etc.

I have sort of narrowed it down to two ways:

A: Cut to fit 1" or 2" thick DOW Blue Board/Ridgid Foam and placed behind the skirting
My thoughts - Higher R value, more seams, more hassle, might crack or come apart with ground heaving

B: Reflective insulation (Reflectix or similar) stapled around the perimeter behind the skirting and then sort of laying on the ground.
My thoughts - Easy install, lower R value, better wind break, no cracking/heaving problems since it's flexible

I have about 200' of perimeter to do..

What do you all think?
Steve
 
I like the foam idea...I take it your going to do it from the inside of the skirting?
 
savageactor7 said:
I like the foam idea...I take it your going to do it from the inside of the skirting?
Click to expand...
tiger foam!
 
Well I ended up using reflectix because I wanted the best wind breaker.. What a difference just in one day.

A night like last night the house would usually drop to ~63-64 degrees by morning before re-loading the stove. Got up this morning, it was still almost 69 and the floors were warmer. Took about 4 hours to do the intall to take the skirting down, install the insulation and re-install the skirt - we'll see how it does when it gets -10 this winter..
 
Sounds like a successful fix so far.
 
moshiersr said:
So I want to insulate the skirting around my doublewide manufactured home.. The floors already have 6" of fiberglass in them, but I want to stop the wind from getting under it in the winter (vented skirting, will remove some insulation in the summer to prevent moisture problems..) and to try cut down on drafts through the floor registers etc.

I have sort of narrowed it down to two ways:

A: Cut to fit 1" or 2" thick DOW Blue Board/Ridgid Foam and placed behind the skirting
My thoughts - Higher R value, more seams, more hassle, might crack or come apart with ground heaving

B: Reflective insulation (Reflectix or similar) stapled around the perimeter behind the skirting and then sort of laying on the ground.
My thoughts - Easy install, lower R value, better wind break, no cracking/heaving problems since it's flexible

I have about 200' of perimeter to do..

What do you all think?
Steve
Click to expand...


Hi How's this doing for you? I was going to do this to my double wide and the manufacturer advised against it. Said the home needs to breath. I can beleive in summer it would be an issue with the humidity but I still feel in the winter it wouldnt be a problem. Just wondering how you're making out.
 
Well so far so good, but it has only been a week. I'm planning to open up a couple "flaps" in the summer to allow for some air flow, but in the winter I have to believe it will be fine. It usually stays pretty dry under there anyways because I have plastic down over 80-90% of the ground beneath the house.

The reflectix is working great so far.. last night we had 30-40mph winds all night with temps hovering around 30.. 6 logs kept the house ~68-70* all night.. Prior to insulating I would have had a 58* degree house in the morning..
 
I did a friends doublewide and i removed all the skirting and put on 5/8" treated plywood with 2" foam attached to the plywood then reinstalled the skirting and placed 3 closable vents for circulation, zero issues to date 4 years ago.
 
moshiersr said:
Well so far so good, but it has only been a week. I'm planning to open up a couple "flaps" in the summer to allow for some air flow, but in the winter I have to believe it will be fine. It usually stays pretty dry under there anyways because I have plastic down over 80-90% of the ground beneath the house.

The reflectix is working great so far.. last night we had 30-40mph winds all night with temps hovering around 30.. 6 logs kept the house ~68-70* all night.. Prior to insulating I would have had a 58* degree house in the morning..
Click to expand...

WOW, that really made a difference. With that amount of savings I think I need to take a look at doing this as well. Thanks for posting. I think as long as the home breaths it will be ok. I think a good indication would be if you would have moisture on your windows and your doors wouldnt shut properly.
 
woodsman23 said:
I did a friends doublewide and i removed all the skirting and put on 5/8" treated plywood with 2" foam attached to the plywood then reinstalled the skirting and placed 3 closable vents for circulation, zero issues to date 4 years ago.
Click to expand...

Thanks! After 4 years and no problems it sounds even more encouraging to do.
 
I have a mobile home in KY that we use for a weekend get away, vacation place, etc. Down in that area they have companies that sell the cut outs from metal doors as insulation. It basically is the scraps from where they cut a hole in the door to put in a window. They cut the sides on a 45* angle so that they slip togther tightly. Works great but you have to make sure you put in vents to allow air flow, especially in the summer.
 
Without that plastic on the ground you'd be trapping a lot of moisture.
There should be some vents of some sort for when it's not cold.

I'm surprised you don't have problems with pipes freezing without the skirts.

Watch out for animals. I had a fox steal insulation for her den from an overhang in an unoccupied building in New hampshire. Replacing frozen pipes in February under a building outside is not fun.
 
Status
Not open for further replies.

Similar threads

P
Kuuma Vapor Fire 100 - Setup Help
Replies
36
Views
3K
The Boiler Room - Wood Boilers and Furnaces
Wiwarm
W
A
looking for installation advice on Jotul F 3
Replies
13
Views
1K
Jotul
begreen
begreen
E
Heat Storage For Low Temperature Solar Thermal
Replies
13
Views
2K
The Green Room
lml999
lml999
B
Need to Troubleshoot and Repair My Pleasant Hearth problem
Replies
19
Views
4K
Pleasant Hearth
boatboy63
B
U
Insert Running Hot Last Night
Replies
32
Views
3K
Classic Wood Stove Forums (prior to approx. 1993)
unimog1300
U
Top Bottom
Back