I have a Classic Bay 1200 insert which worked great last season. I tried firing it up this morning, but no red light - as if the thermostat wasn't "calling" for heat. The blue light was flashing and the blower was working each time the reset button was pushed, but no pellets - and no flame or heat. It does have the wireless thermostat on it, which seems to work from the handset. Should I change the batteries in it and try it again? The manual stated various items to check, one of which is snap disc #3 - how does one reset this? Thanks for any and all suggestions!
No call light - what do I do?
- Thread starter caseyclan
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
slls
Minister of Fire
Go to the thermostat connections on the stove, jumper across and the red light should come on. Remove the jumper and the red light should go out. If it does you have a thermostat problem.
slls said:
Do I jumper across the 2 connectors where the thermostat wires are connected? Do I us any type of wire as a jumper? Thanks for the suggestion
slls
Minister of Fire
Any wire will do, even a paper clip. This way it will run all the time, to stop the stove, remove the jumper.
- Status
Similar threads
