3" air intake for New Englander

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

donkarlos

New Member
Oct 5, 2008
66
MA
so.... for basement install we need a 3" air intake ...
what are people doing for this since the pipe on the stove is 2" only ? it would seem there would be a part for this but im looking at using metal tape and a clamp...
thanks !
 
It seems like we've discussed this here before so you might want to do a search but since the OAK doesn't get hot I'd think that just about any type of pipe the right size would work if it's kept at a reasonable distance from the exhaust vent. Whatever you use just remember to put some type of grill or screen over the exterior end so that critters don't nest in it.
 
I think some are getting a auto exhaust adapter 2 in to 3 in.
 
auto exhaust ? that is one avenue I haven't tried. I have a 3" duct pipe and all but tried a couple different hvac places with no luck..
 
I purchase a reducer the had at lowe's. It is rubber but it is the really thick stuff for septics,etc. Put clamps on it and your good to go. I was concerned about the part being rubber however, as stated from someone else... "doesn't get hot there" don't forget your elevation might require you to go with a larger diameter OAK.

Eric
 
Status
Not open for further replies.