Flex Liner install (like NewtownPAs) questions.

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

snj2k2se

Member
Jan 10, 2008
17
South Jersey
I just read through the whole series of threads NewtownPA went through installing a liner.

https://www.hearth.com/econtent/index.php/forums/viewthread/10193/

After months of research, I think I have decided what I want to do as my setup is almost identical to the one in the thread above.

Currently I have an Avalon Ranier with about a 5 foot section of flex pipe installed through a blockoff plate that ends in the chimney just above where the damper would be. This works fine and drafts OK (just OK) but is a royal pain to clean.

I want to install a 6" flex liner all the way to the top to help the draft and to make it easier to clean properly.

My question is I only have about 18 feet from the top of the stove to the cap on the chimney, mostly exterior. Is this tall enough for a 6" liner to draft?
The current direct vent is decent but I would like to go from a night and weekend to a full time burner. This stove isn't big enough to heat the whole house but it will definitely help.

Also Newtown, if you read this, what brand liner did you finally go with? Sorry but I couldn't find what your final decisions was.
 
It should draft great. Possibly better than it does currently, especially if it is insulated. What is the current flue tile size in the chimney?
 
I helped Newtown install his liner. I believe it was Forever Flex, but not positively sure.
Most stove manufacturers call for 15' minimum of chimney. So 18' should be fine. I believe you will find it drafts much better, and yes is much easier to remove baffle and clean, rather than having to unconnect and pull the insert out every year.
 
Hogwildz said:
I helped Newtown install his liner. I believe it was Forever Flex, but not positively sure.
Most stove manufacturers call for 15' minimum of chimney. So 18' should be fine. I believe you will find it drafts much better, and yes is much easier to remove baffle and clean, rather than having to unconnect and pull the insert out every year.

I got mine from Rockford Chimney (google it). It was the 316Ti, and I think it was the thicker metal, but I'm starting to forget. I just remember that it was tough to push down. Hogwildz needs to start his own business, he'd be RICH!
 
This should draft well - much better than your previous set up - and even better if it is insulated. Mine is not insulated but drafts very well at about 20 ft.
 
Status
Not open for further replies.