Harman XXV settings???
- Thread starter redbullguy
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
DOBS
New Member
The pattern on the glass is what I get too. I give it a quick wipe with a cotton cloth each morning and evening when I top off the pellets and it stays pretty clean most of the time. After a week burning cleanfire pellets, I get about 1-2 cups of ash in the tray, not much outside the tray. I push the accumulated ash from the burn pot into the tray each morning and evening. I'm sure once the temps outside get colder I'll be seeing more ash. But right now, there is very little outside the pan.
The pics of the Harmon XXV looks like ours does within 3 or 4 days of cleaning it.
I apparently have a dilemma. We're in the northern part of Michigan's lower peninsula; Elk Rapids, between Traverse City and Charlevoix. Have one and a half tons left, thought I better check my supplier. He's out and doesn't know when he'll get more, checked three others in Kalkaska, Traverse City and Grayling.......nada, nuthin'. Checked with the manufacturer, Michigan Wood Pellet, Inc. Says they won't have any on hand until the end of December.........can't find dry sawdust or dry wood. Sounds fishy to me, but of course it still doesn't solve my impending problem.
Anyone know of any other supplier who has product in Michigan?
I apparently have a dilemma. We're in the northern part of Michigan's lower peninsula; Elk Rapids, between Traverse City and Charlevoix. Have one and a half tons left, thought I better check my supplier. He's out and doesn't know when he'll get more, checked three others in Kalkaska, Traverse City and Grayling.......nada, nuthin'. Checked with the manufacturer, Michigan Wood Pellet, Inc. Says they won't have any on hand until the end of December.........can't find dry sawdust or dry wood. Sounds fishy to me, but of course it still doesn't solve my impending problem.
Anyone know of any other supplier who has product in Michigan?
Cantman.......
Our XXV looks the same. I get as much ash around the ash pan as I get in it (empty the shop vac every other time the pan is emptied); and don't open the door without spreading a cloth to catch what dribbles out. So far, it seems the ash pan fills to the top in about a week and a half.
The several replies to the person who asked what setting people keep their XXV on was interesting. I noticed some said on "Room" and some said on "Stove.".........I'm curious as to what one does over the other?
Our XXV looks the same. I get as much ash around the ash pan as I get in it (empty the shop vac every other time the pan is emptied); and don't open the door without spreading a cloth to catch what dribbles out. So far, it seems the ash pan fills to the top in about a week and a half.
The several replies to the person who asked what setting people keep their XXV on was interesting. I noticed some said on "Room" and some said on "Stove.".........I'm curious as to what one does over the other?
acowherd
Member
has not been cold enuf to run my xxv yet
Running my insert at
auto mode
feed on 3
70
with fan on med
interested in the pics of the xxv
looks like i will be cleaning it frequently
Running my insert at
auto mode
feed on 3
70
with fan on med
interested in the pics of the xxv
looks like i will be cleaning it frequently
- Status
Similar threads
