Hooking up Thermo probe question about leads?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
millhouselives

millhouselives

New Member
Oct 20, 2008
71
Southern Vermont
Hi Again

I am going to plug in thermo probe into Accentra but before I do I wanted to check with the experts. It has two leads, one black and one red. I looked on the stove receiving side and there are no markings to indicate if one side is red and other is black.

Do I need to be concerned how it gets plugged in?

thanks,
 
millhouselives said:
thank you so much I will be doing that in a minute now that I have confirmation that it is ok to plug in
Click to expand...

Good luck, ya got a 50/50 chance of being right
 
Yeah, I had the same concern when I connected my probe. It would be nice if they stated in the manual that it does not matter which color wire on the probe goes to which terminal on the stove. Its good that you checked first though.

Happy burning!
 
Status
Not open for further replies.

Similar threads

D
Condar FlueGard Questions
Replies
13
Views
736
Blaze King
stoveliker
stoveliker
D
Piazzetta Sabrina
Replies
0
Views
313
The Pellet Mill - Pellet and Multifuel Stoves
devo1052
D
pb0812
Quadrafire Mt Vernon E2 failing with 6 flashing red lights
Replies
4
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
pb0812
pb0812
Ranckie
Harmon Insert Not Burning Correctly
Replies
2
Views
561
The Pellet Mill - Pellet and Multifuel Stoves
Ranckie
Ranckie
MaineiacMoose
Harman P-68 Refurbishment With a Couple Questions.
Replies
4
Views
381
The Pellet Mill - Pellet and Multifuel Stoves
Washed-Up
Washed-Up
Top Bottom
Back