Help Please: Harman Accentra Combustion Light won't go off, no feed

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
M

mjstev01

New Member
Jun 25, 2008
14
South Shore, MA
Help needed. 6th day with new Harman Accentra. Worked beautifully until this AM. I shut down the stove last night before going to bed. Turned dial to off position. This morning I noticed the combustion light on the board was still on. However, no sound of a motor/fan running. When turned to the "Test" position the auger will not feed. I tried unplugging in hope it might reset, but no luck. When plugged back in, same story, combustion light on, auger won't feed in "Test". Any ideas? Please help!!!
 
Pulled the stove out last night to investigate further, still no luck. Combustion fan moves freely, not bound up. Has anybody else experienced this? When turned to "Test" the distribution blower is the only one to come on. No movement/sound from the combustion blower even though the light on the board is on. As a result, no feed. Help please.
 
Sounds like the combustion motor. Can you put power directly to the motor to see if it works?

I think I read that you can unhook the distribution motor wires and hook the combustion motor in it's place then switch to test. See if the motor turns then. If not, seems as though the motor is shot.
 
Do as codebum says to check the blower.
also check to make sure the wires didn't pop off the board... 6 days of use shouldn't burn out the blower that quick. but it could be defective...
lecomte38
no combustion blower= no vacuum=no feed.......
 
Forgive me for the obvious. You have a brand new stove, why haven't you called the dealer who sold the stove to you.
 
Status
Not open for further replies.

Similar threads

I
Harman 25th anniversary won't feed or light
Replies
0
Views
401
The Pellet Mill - Pellet and Multifuel Stoves
Ira Hayes
I
F
Combustion fan on pel pro
Replies
0
Views
196
The Pellet Mill - Pellet and Multifuel Stoves
Foremantodd
F
R
Harman Accentra 2 blink
Replies
6
Views
546
The Pellet Mill - Pellet and Multifuel Stoves
Washed-Up
Washed-Up
J
Harman p61a won't shut off
Replies
22
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
rickwai
rickwai
C
Heartier won’t feed pellets
Replies
0
Views
552
The Pellet Mill - Pellet and Multifuel Stoves
cldiesel
C
Top Bottom
Back