Should I Yank the Spark Arrestor Screen?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
B

beekeeper

New Member
Apr 2, 2008
39
Virginia
I've just installed two stainless 6" chimney flue in my new house - still under construction --, one for a Jotul Oslo and the other for a Kozyheat fireplace. My roof is very steep (10/12) and very very high. When we take the toe-boards down and finish off the shingles, it will be next to impossible for me to get to those chimney caps, so I'm hoping to do all of my cleaning from below. Because I'm seeing issues with spark arrester screens I'm wondering if I should yank mine off before I finish up -- I don't want to have to try to get back up there just to unplug a screen.

I'm sure the screens are there for a purpose -- but all the masonry chimneys around here don't have them so I'm wondering how important it is.

Any thoughts?
 
Yes. I'd get a open chimney cap and throw the screen away, else you'll forever be cursing that thing. You probably read the other post about this and that is what is advised there also.
 
I've been having to clean mine about every 6 weeks. It gets all nasty and gummy.

But on the other hand, the one on my grandpas pot belly stove never once got nasty. It has to do with all number of things, including the wood you burn, your stove, length of chimney pipe, etc.
 
Yup, best thing I ever did for stove performance.
Ed
 
If you go with no cap make sure you inspect your chimney before burning next season. I've seen squirrel nests, dead birds and bats in mine before I installed a cap. One time I opened the stove door and a bat flew out, the wife freaked!

My screen never plugs up.
 
beekeeper said:
I've just installed two stainless 6" chimney flue in my new house - still under construction --, one for a Jotul Oslo and the other for a Kozyheat fireplace. My roof is very steep (10/12) and very very high. When we take the toe-boards down and finish off the shingles, it will be next to impossible for me to get to those chimney caps, so I'm hoping to do all of my cleaning from below. Because I'm seeing issues with spark arrester screens I'm wondering if I should yank mine off before I finish up -- I don't want to have to try to get back up there just to unplug a screen.

I'm sure the screens are there for a purpose -- but all the masonry chimneys around here don't have them so I'm wondering how important it is.

Any thoughts?
Click to expand...
beekeeper,
I will be removing my screen after very shortly... You can see why in this post and the recomendation of others. I hope this helps...
https://www.hearth.com/econtent/index.php/forums/viewthread/31605/
 
Some people think you'd be shooting the "canary in the coal mine" messenger, but I say get rid of it if local codes allow. Even if creosote/frost isn't an issue, just burning paper or Birch bark could clog them up.
 
Status
Not open for further replies.

Similar threads

R
Spark arrestor plugged?
Replies
6
Views
607
The Hearth Room - Wood Stoves and Fireplaces
Trevor Tahclep
Trevor Tahclep
S
Smoke in home
Replies
13
Views
1K
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
K
New Construction - Kozy or Pellet?
Replies
6
Views
786
The Hearth Room - Wood Stoves and Fireplaces
Crab
Crab
E
Removing metal plate in chimney chase
Replies
1
Views
1K
The Hearth Room - Wood Stoves and Fireplaces
emorems0
E
D
Chimney Fires White Paper - Read This!
Replies
14
Views
2K
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
Top Bottom
Back