Timber!

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

RAY_PA

Feeling the Heat
May 13, 2008
319
Northeastern PA
This is the biggest tree I have cut down to date. It was on the bank behind our cabin, after the pics that was on here last week, I had nightmares Saturday night, in anticipation of the events of Sunday morning, But all went well and I assume this one tree will fill the remainder of our wood shed.
 

Attachments

  • 000_0011.jpg
    000_0011.jpg
    111.7 KB · Views: 786
  • 000_0012.jpg
    000_0012.jpg
    117.6 KB · Views: 808
  • 000_0013.jpg
    000_0013.jpg
    119.8 KB · Views: 796
Good take Ray, looks to me like 42" at the widest.

I don't really like harvesting those larger trees either...mostly cause you have to process it right there on the site. Bark looks like ash but its not...what kind of tree is it?
 
its white oak, I dont usually hjarvest trees like that either, but this one is only about 50 feet from the wood shed at the cabin, it fell within a few feet from the driveway. We cut it because it was on the bank and if it fell from a storm or what ever, it most likley would have hit the cabin. I never did measure the stump, but I will, as I am curious. We will cut/split it right there and use the trailer to haul it over to the wood shed.
 
What kind of tree is that Ray? The bark looks like White Oak to me, but the wood doesn't.

Curious..

Heh- answered 1 minute after I posted my question. Thanks!
 
My judging is:

9.5 Tree
9.5 difficulty
7.5 Felling (stump could have been more flat)
10 Beer finish!!!!!

Was that 2 Oaks that joined? Looks that way from the growth rings.

Nice work!! I'll have a beer for you tonight in honor of your fallen friend the "great white"
 
the 'back cut' could have been more flat? The beer was a celebration drink and it was damn good. I didnt take a 'before picture' (with all the excitement, I forgot) but here is one from the summer, when we started the cabin project. And one from the stump looking at the cabin, you can see the wood shed to the left of the cabin, at the back of the Dakota. So we wont have far to move the wood.
savageactor7....good eye, it measured just under 42 inches.
 

Attachments

  • 101_1368.jpg
    101_1368.jpg
    78.7 KB · Views: 665
  • 000_0014.jpg
    000_0014.jpg
    91.2 KB · Views: 1,140
Looks like red oak
 
yikes!...maybe it is??? I am not one afraid to admit when I am wrong. Bark sure looks like white oak to me, but wood is a tad on the 'red' side, color wise...??
 
Red oak was my first assumption, but I'm by no means any kind of expert. I was just going by the color of the wood. I wouldn't begin to be able to id a tree by its bark(aside from white birch)
 
Looks like red oak to me, too.

I would need leaves to look for the signature non-pointed leaf tips to identify white oak and white oak bark often 'lifts' (looks like a animal pulled it off) in patches [just the outer layer] when a tree gets that size / age.
Also tends to have a rather round canopy, some red oak canopy looks more like elm.
 
Yeah I was just kidding with the back-cut! Unless you had a really big saw and bar their is no way to make a clean stump with that size tree! Did you rope/chain pull it or use wedges? Those gas tanks and your house being so close made things interesting!
Getting them big rounds on the splitter will be the next challenge! Remember lift with your legs!
 
yes, I did have a rope to it to help it go the right way. I had to make 2 cuts with a 20" bar. Yeah, those big rounds will be a challange to get on the splitter I'll take some pics of that, when we get to it.
 
looks like red oak. red oak is definatly red as soon as you cut it. White oak has a dark light black center but a couple days after cutting starts to lighten almost the same color as the wood near the outside bark.
 
Ray don't kill yourself...noodle cut 'em into quarter rounds.
 
Bark looks like white oak. Remember white oak bark is flaky when you rub your hand over it and is usually white. Red oak bark much tighter to the tree. It also tends to have silver streaks in it when looking up.

Also Ray be careful on your back cuts. You don't want to cut your hinge wood on the outside of the tree all the way through. This can cause the tree to roll and loose control during the felling process.
 
Some nice free btu's.......that's White Oak for sure. Nice score for the stove.

WB
 
May I add........you'll earn your keep on that trunk.....WHOOOAAA!

I've posted some pics on red vs white oak
As the tree matures (esp with red white oak) the bark becomes really defined, my pictures are from younger trees.
Shagbark hickory will fool you by looking (not by handling though) young shagbark hickory looks baby bottom smooth (totally different from mature pieces.)
The stump of Rays tree has the standard "Old" White Oak pattern

WB
 

Attachments

  • wb_rw_01.jpg
    wb_rw_01.jpg
    156.7 KB · Views: 421
  • wb_rw_02.jpg
    wb_rw_02.jpg
    145.9 KB · Views: 444
PATreeGuy said:
Bark looks like white oak. Remember white oak bark is flaky when you rub your hand over it and is usually white. Red oak bark much tighter to the tree. It also tends to have silver streaks in it when looking up.

Also Ray be careful on your back cuts. You don't want to cut your hinge wood on the outside of the tree all the way through. This can cause the tree to roll and loose control during the felling process.

I was thinkin it was white oak.....either way its oak and gonna make a serious pile of fire wood and now wont pose a threat to the cabin, should it have fell in the wrong dirrection.
Great tip on the back cut, I wasnt aware of that and have had a few spin on me in the past...I will try to practice that in the future. THANKS!!

WOODBUTCHER, great pics of red vs white. Thanks.
 
^Ray occasionally when you're cutting pull the saw away from the round so the noodle nest will fall and not overheat the saw.
 
Thanks for all the info guys. I've learned more about oak than I ever thought possible! I now know that oak that I cut in my yard is red oak
 
CTburns said:
Thanks for all the info guys. I've learned more about oak than I ever thought possible! I now know that oak that I cut in my yard is red oak
Are you sure about that? There are a bunch of different kinds of oaks out there some have very similar characteristics as others. For example black oak is very similar to red oak except the bark pattern is a little more blocky at the base and the nuts and leaves vary very slightly. Then there is scarlet oak. And pin oak. Don't forget about chestnut oak aka rock oak. Bur oak... post oak..... live oak.... willow oak and the list just keeps going on :D Enjoy
 
PATreeGuy said:
CTburns said:
Thanks for all the info guys. I've learned more about oak than I ever thought possible! I now know that oak that I cut in my yard is red oak
Are you sure about that? There are a bunch of different kinds of oaks out there some have very similar characteristics as others. For example black oak is very similar to red oak except the bark pattern is a little more blocky at the base and the nuts and leaves vary very slightly. Then there is scarlet oak. And pin oak. Don't forget about chestnut oak aka rock oak. Bur oak... post oak..... live oak.... willow oak and the list just keeps going on :D Enjoy

I could have all of that, but for my purposes when I cut oak in my woods, I'll just consider it red, unless it is white in the middle! i'm just pretty happy that there is a bunch of oak and hickory back there!
 
Status
Not open for further replies.