Dutchwest smoke smell and catalytic converter temperature

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
M

mban112

New Member
Jul 13, 2008
22
Kansas
I am a newbie. We just installed a new to us Dutchwest Federal Airtight in our fireplace. I’ve had three fires in it. Last night there was a smoke smell. I should say, that I did have to open the front door a couple of times and each time I do that some smoke comes out due to suction I guess. Any thoughts? I haven’t seen any smoke coming out of anywhere.

Also, on the Dutchwest there is a catalytic converter and on top it has a temperature gauge. Is the temperature for the catalytic different than the actual temperature of the stove? Sometime the temperature guage is high while my magentic guage is not.

Thanks.
 
I have a different stove (Fireview with cat) but I usually prime the chimney first with a lit paper ball. I also wait a moment after opening the air intake all the way, before opening the door.

Mike
 
If you have the catalytic converter engaged while burning you'll have to disengage it and wait a minute before opening the stove. Otherwise smoke is still in the firebox and will spill out.

The probe thermometer in the cat will be about twice the outside temp of the stove.
 
Hey MBAN112, I have the same stove you do. it took me several tries to get the stove to light up without setting off the smoke alarms and scaring the crap out of my kids and the dog. I tried several things, including my wife's blow drier, which by the way got me yelled at, but currently what is working for me is newspapers. just make sure you are using black ink newspaper, not the colorful ones as that may jeoperdize the integrity of your cat combustor. Below is a link to the manual for your stove in case you dont currently have one.

http://tinyurl.com/ydk46c8

Happy Burning!!
 
mban112 said:
I am a newbie. We just installed a new to us Dutchwest Federal Airtight in our fireplace. I’ve had three fires in it. Last night there was a smoke smell. I should say, that I did have to open the front door a couple of times and each time I do that some smoke comes out due to suction I guess. Any thoughts? I haven’t seen any smoke coming out of anywhere.
Click to expand...

In addition to the advice to become more familiar with the manual, in particular the part about disengaging
the converter-bypass gate before opening the door, I'll relate this. A few years ago, my Dutchwest (which
I'd been using since new 20 years ago) began giving a smokey smell. Only on a low overnight burn.
I decided it was probably leaky seams between the cast-iron panels which form the stove. I bought a
new welded-steel Blaze King.

Also, on the Dutchwest there is a catalytic converter and on top it has a temperature gauge. Is the temperature for the catalytic different than the actual temperature of the stove? Sometime the temperature guage is high while my magentic guage is not.
Click to expand...

Uh, yeah. It's RIGHT above the cat, so it'll get VERY hot.
 
Status
Not open for further replies.

Similar threads

B
Smoke Smell Overnight
Replies
4
Views
804
The Hearth Room - Wood Stoves and Fireplaces
Enplater
Enplater
E
HELP! Ongoing chemical smell in room above wood burning insert
Replies
8
Views
889
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
M
Occasional smoke smell
Replies
15
Views
1K
Blaze King
BKVP
BKVP
L
Advice for insert
Replies
17
Views
1K
The Hearth Room - Wood Stoves and Fireplaces
fbelec
F
P
old Heatilator
Replies
13
Views
375
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
Top Bottom
Back