How many fire tubes in a Tarm Solo Plus 30?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
D

DaveBP

Minister of Fire
May 25, 2008
1,156
SW Maine
Looking around the Tarm literature I can't find the number of fire tubes in the heat exchanger on the Solo Plus 30 (now Scantec). The Solo Plus 40 has 8, it looks like the big 60 has 12 (guessing from a diagram). I believe they are all 80mm tubes (just over 3").

Is my guess of 6 tubes correct?
 
Hi DaveP
You are correct on both counts; there are 6 tubes, and they're about 3 1/8" - 3 1/4" diameter.
 
Status
Not open for further replies.

Similar threads

N
New set up of an old boiler with storage
Replies
10
Views
2K
The Boiler Room - Wood Boilers and Furnaces
all night moe
A
paul'r
Need advice adding a 1980 Tarm MB Solo to my heating setup
Replies
0
Views
1K
The Boiler Room - Wood Boilers and Furnaces
paul'r
paul'r
P
TARM SOLO 40 Plus MKII WATER STORAGE
Replies
13
Views
2K
The Boiler Room - Wood Boilers and Furnaces
TimfromPittsburgh
TimfromPittsburgh
E
EKO 25 - heat exchange tube help
Replies
18
Views
2K
The Boiler Room - Wood Boilers and Furnaces
JTWALL
JTWALL
A
Replacing Brookwood boiler: Gasifier vs a "conventional"?
Replies
12
Views
3K
The Boiler Room - Wood Boilers and Furnaces
aczlan
A
Top Bottom
Back