Any good ideas on making a rake?
- Thread starter westkywood
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
Bootlegger
New Member
LLigetfa
Minister of Fire
I found this on Amazon but it does not look like the teeth are long enough:
http://www.amazon.com/Woodfield-Ash-Rake-Tool-Fireplace/dp/B000KHVHSW
http://www.amazon.com/Woodfield-Ash-Rake-Tool-Fireplace/dp/B000KHVHSW
golfandwoodnut
Minister of Fire
All right, you guys got me hooked, or should I say raked. I had an appropriate large spatila that I got as a gift for the grill From my golfing background it came equipped with a golf grip. I just cut the teeth and bent it in the vice. Now I have the Parfect (pun intened), ParBBQ (the name ont the grip) coal rake. It matches my call name GolfandWoodnut. I might even carry this in my golf bag for when there is not a rake in the bunker! %-P
LLigetfa
Minister of Fire
THEMAN
New Member
woodgeek said:
haha I'm willing to bet money you are correct. As a matter of fact I should probably delete the post, just to be safe.
THEMAN
New Member
LLigetfa said:
yeah but the ash slips through the holes so perhaps a hoe/ash strainer/rake combo haha
Shari said:It's not clear in your photo: Is that 5th tine cut a little short for a reason?
Shari
You have a sharp eye !
This is an "opposable tine" which facilitates the elevation and specific placement of coals :cheese:
THEMAN
New Member
DBoon
Minister of Fire
I have read that when ash rakes develop an opposable tine they quickly develop new, unintended capabilities and also increase in price dramatically.
I typically use a curved end fireplace poker. That being said I also took a cheapo one hand garden rake and bent 2 of the five tines up, it works fine for raking coals (with a leather gauntlet glove on).
firefighterjake
Minister of Fire
Um, what's the purpose of this rake?
If you want to shovel the stuff out, why not just use a fireplace shovel?
If you want to shovel the stuff out, why not just use a fireplace shovel?
EJL923
Minister of Fire
When I first got my stove installed I realized i needed a rake. i was impatient and cheap, so into my garage i went scrounging. I found a 1" x 1/8" thick piece of steel. At 4" i made a 90° bend after heating it with a torch. Cut to desired length. If you need a real long rake, you may need thicker steel if you want it sturdier. Mine is plenty strong around 20". For effect, i drilled a hole in the other end in case i want to add a leather shoe lace. Dont forget to round the edges on a grinder. Also had a can of high heat paint laying around. Minus the drilled hole, this rake was made with a saw and a torch in about 10 minutes. What started out as a temporary solution became my permanent ash rake. Works very well.
firefighterjake said:
talk about eagle eyes in this community.....
this should not merely be regarded as an ornament......you may recall J Cash's song ??....
Ring of Fire
LLigetfa
Minister of Fire
That, my man, is the second of the three rings of marriage. The first is the engagement ring and the last is the suffering.firefighterjake said:
LLigetfa
Minister of Fire
The purpose of the rake is to separate the coals from the ashes, not to replace the shovel.Spikem said:
>- Status
Similar threads
- Locked
