Big box store Pellet comparing! List and mini review!

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
jtakeman said:
macman, and I were just chatting. I got a weekend of pellet stove and beer all lined up. That ought to fix me right up. But really its about time. We are going bonkers at work now. So the time isn't there to do all the traveling to get what I want. So its more frustrating than anything. I wanted to get more of the bigger names. Propellet and Dragon Mountains. I was even offer free propellets. But no time to go get them. But this will have to do. I can always test them later. There is always next fall.

With the lake regions(I wont bash but!) Proceed with caution. Keep that pot scraper handy. wink!

I hope to start posting results soon!
jay
Click to expand...

Yeah, I was not seeing great results early on. With the Greene Teams buring pretty hot and the Okies still on standby, I think I forgot about the Lakes Region on purpose.

Beer and Pellet stove weekend. Have a few really cold ones for me :cheese:
 
CanadaClinker said:
I see our Canadian Tire sells Winnipeg Forest Products for $299 a ton but haven't checked on a bag price nor tried any yet... still working on 4 1/2 tons of ligs....... would be interested if anyone has tried them (Winnipeg FP) for feedback.... I don't know when we will see ligs again around here any time soon....... cc. :-S
Click to expand...

Found Maine Wood Pellets at a local Canadian Tire tonight. 5,99$/bag. 2 bags in the trunk, they're in line for testing!

No signs of Winnipeg Forest Products around here yet.

Bye,
 
Benski,

I burned some cubex in my next testing batch. See here.

https://www.hearth.com/econtent/index.php/forums/viewthread/50101/

My heat reading on setting 4 was very close to yours. I averaged 494ºF for temps. I use an IR gun and measured the heat exchanger surface plate. The air I measure was at 269ºF average. These are the hottest pellets I burned so far. They are very pricey my way at $290/ton. But with that heat just may be worth getting a ton for the cold season!

jay
 
smitty273 said:
after looking at the results I was wondering what is the most important results everyone looks at? fines, ash, heat? and why.
Click to expand...

Hi smitty273,

Somewhere in this long thread I ask "what is a bag of pellets" . The short answer is its a bag of heat! You buying it to heat your house, So you want the hottest pellet you can afford. Then you look at the ash amount. Less is what keeps you from messing with the stove everyday. Fines usually get dumped in my hopper. I just noted for the others. There just heat to me. But you don't want an excessive amount either. Might jam your auger.

Very good question, I am glad you asked!

Hope I answer it OK for you.
jay
 
jtakeman said:
.... short answer is its a bag of heat! You buying it to heat your house, So you want the hottest pellet you can afford. Then you look at the ash amount. Less is what keeps you from messing with the stove everyday. Fines usually get dumped in my hopper. I just noted for the others. There just heat to me. But you don't want an excessive amount either. Might jam your auger.
Click to expand...

I agree w/ Jay 100% Heat, then ash, then fines. It's all about the HEAT!! The other stuff is just a PIA that you may have to deal with.
 
Great question smitty. Some stoves ( and owners) cannot tolerate certain things. Some stoves bridge and can't fit longer pellets into the auger causing the stove to go out. Some can't tolerate alot of fines , it causes auger to jam or make noises. Some stoves have problems with too high an ash and you have to clean numerous times a day. Then the obvious, you are buying BTUS or heat ! Some stoves burn certain pellets better than others and some pellets have more BTUS than others due to what they were made of and how they were made. The trick is to get the most BTUS for the money. Jay and now Bensky have done a great job of helping all of us to discover what pellet does a good job of satisfying our own criteria of what a good pellet is with this thread. For me it has come down to a few things, HEAT AND CONSISTENCY. Others may have a different criteria. After you burn a few hundred bags and run some of your own tests in your own stove you will know what you need out of pellet fuel. JMHO.

Schoondog
 
jtakeman said:
Benski, I burned the Cubex already and my results were similar to yours. They are one of the best I have seen locally. Top notch and screaming hot pellets.
Click to expand...

Good to know that, I need one more pallet to finish the winter. But they seem hard to find around here!

I'm just following posts now, pretty busy with work, so pellets testing will be for week-end only.

THanks,
 
BTU said:
Of course there are some who want to try every pellet known to mankind and is still looking for that perfect pellet... I hope you find it.... ;-)
Click to expand...

Somewhere out there is a "magic" little pellet. It is extremely hot and burns with no ash at all. Fines are non existent. I know it it's out there and someday I will find it! When I do just maybe I will share. I said maybe! %-P :lol:

I know, I need a hobby or something! Couped up all winter gets to ya! :lol:

hehe
jay
 
smitty273 said:
ok, i've got to ask, what exactly is a clinker?
Click to expand...

smitty,

Sorry I missed that question. A clinker is formed due to chlorides(salt) within the fiber or an additive. Durring the burn process the chlorides melt and join with the ash. This form's a rock or crusty object that sticks to your burnpot and clogges it. Here is one I got from the Inferno's I tested. See attachment.

Bear can you post your clinker for us?(that sure was a beauty!)
 

Attachments

  • Clinker.jpg
    Clinker.jpg
    16.1 KB · Views: 700
Hi Everyone,

I'm new here and also new to the pellet stove scene, I've had my Harman XXV for a week now and love it! I've really enjoyed everyone's posts and appreciate the testing you've done.

Regarding the ash samples you've taken, have you noticed any variations in the consistency of the ash? For instance, light and fluffy, or hard and clumpy, or sticks together in one solid mass. Seems to me that would be a concern for some who end up cleaning their stoves multiple times a day. With the bottom feeding type stove I have there's really no need for daily cleaning, I just remove the excess ash every few days to a week and give it a scrape. However, with some pellets I have noticed the ash is thicker and clings together and doesn't push out of the pot, but instead forms a clump that backs things up and requires more frequent removal. This may also be a major cause of clinkers, I'm not sure. I'd also be interested to know if there's any difference in the ash consistency between hard and soft woods.

Thanks,
Chris
 
csalinardi said:
Hi Everyone,

I'm new here and also new to the pellet stove scene, I've had my Harman XXV for a week now and love it! I've really enjoyed everyone's posts and appreciate the testing you've done.

Regarding the ash samples you've taken, have you noticed any variations in the consistency of the ash? For instance, light and fluffy, or hard and clumpy, or sticks together in one solid mass. Seems to me that would be a concern for some who end up cleaning their stoves multiple times a day. With the bottom feeding type stove I have there's really no need for daily cleaning, I just remove the excess ash every few days to a week and give it a scrape. However, with some pellets I have noticed the ash is thicker and clings together and doesn't push out of the pot, but instead forms a clump that backs things up and requires more frequent removal. This may also be a major cause of clinkers, I'm not sure. I'd also be interested to know if there's any difference in the ash consistency between hard and soft woods.

Thanks,
Chris
Click to expand...

Hi Chris and welcome aboard.

I noticed a difference in consistency, But with my stove there is an agitator(stirrer) in the burn pot. So not much clumps. It mixes the ash as I burn. No scraping for me or even removing ash from the burnpot for a whole week. I just do my weekly cleanings when I am not testing.

If you look at the michigan's volume and then the weight. It about filled the jar to the top. But the weight was lower than the Fireside Ultra's. but the Fireside Ultra's were only about 3/4 of a jar.

The softwoods ash seemed to be the lightest and fluffiest compared to the hardwoods. The hardwoods seem more dense overall.

As for the clinkers, They are formed from chlorides in the fiber. The hotter you burn the more they tend to clinker up on you. The chlorides fuse with the ash and form the chucks. My stove doesn't usually clinker either. I also have another testing thread going. Check link.

https://www.hearth.com/econtent/index.php/forums/viewthread/50101/

This is for the bigger named brand pellets.

Glad you enjoyed this.
jay
 
jtakeman said:
BTU said:
Of course there are some who want to try every pellet known to mankind and is still looking for that perfect pellet... I hope you find it.... ;-)
Click to expand...

Somewhere out there is a "magic" little pellet. It is extremely hot and burns with no ash at all. Fines are non existent. I know it it's out there and someday I will find it! When I do just maybe I will share. I said maybe! %-P :lol:

I know, I need a hobby or something! Couped up all winter gets to ya! :lol:

hehe
jay
Click to expand...

Jay-

I think I saw that pellet in the cave, Elvis and Sasquatch were sitting on a couple of bags while they were drinking from the Holy Grail, and shining up King Solomon's treasure......
 
jtakeman said:
smitty273 said:
ok, i've got to ask, what exactly is a clinker?
Click to expand...

smitty,

Sorry I missed that question. A clinker is formed due to chlorides(salt) within the fiber or an additive. Durring the burn process the chlorides melt and join with the ash. This form's a rock or crusty object that sticks to your burnpot and clogges it. Here is one I got from the Inferno's I tested. See attachment.

Bear can you post your clinker for us?(that sure was a beauty!)
Click to expand...

in actuality, and a technicality, but the chlorides do not "melt", but rather, their existence lowers the fusion temperature of the silica in the ash (silica is the main component of ash), causing the silica and other minerals to fuse together in a more solid cohesive "clump" than the ash usually would, aka: the infamous CLINKER!
 
Lousyweather said:
jtakeman said:
smitty273 said:
ok, i've got to ask, what exactly is a clinker?
Click to expand...

smitty,

Sorry I missed that question. A clinker is formed due to chlorides(salt) within the fiber or an additive. Durring the burn process the chlorides melt and join with the ash. This form's a rock or crusty object that sticks to your burnpot and clogges it. Here is one I got from the Inferno's I tested. See attachment.

Bear can you post your clinker for us?(that sure was a beauty!)
Click to expand...

in actuality, and a technicality, but the chlorides do not "melt", but rather, their existence lowers the fusion temperature of the silica in the ash (silica is the main component of ash), causing the silica and other minerals to fuse together in a more solid cohesive "clump" than the ash usually would, aka: the infamous CLINKER!
Click to expand...

Lousyweather,

Thanks for the correction. I will say "allowing them to fuse" in the future "not melt". Please don't give me an "F". I was partially right, well sort of anyway. hehehe :lol:
 
Oh, I certainly had a name for it when I was trying to get it out of the burn pot.

I'm certain that the owners of this site wouldn't want me to post it.
 
SmokeyTheBear said:
Oh, I certainly had a name for it when I was trying to get it out of the burn pot.

I'm certain that the owners of this site wouldn't want me to post it.
Click to expand...

Ok, Ok! I got cha. She sure is a monster though. I will never complain about a clicker again. Mine all seem like marbles to that one.
 
Lousyweather said:
jtakeman said:
BTU said:
Of course there are some who want to try every pellet known to mankind and is still looking for that perfect pellet... I hope you find it.... ;-)
Click to expand...

Somewhere out there is a "magic" little pellet. It is extremely hot and burns with no ash at all. Fines are non existent. I know it it's out there and someday I will find it! When I do just maybe I will share. I said maybe! %-P :lol:

I know, I need a hobby or something! Couped up all winter gets to ya! :lol:

hehe
jay
Click to expand...

Jay-

I think I saw that pellet in the cave, Elvis and Sasquatch were sitting on a couple of bags while they were drinking from the Holy Grail, and shining up King Solomon's treasure......
Click to expand...

LW,

I didn't see your reply. Don't know how I missed it. Can you tell me what you were looking for in that cave? Must have something to do with a stove I'll bet. Elvis and Sasquatch, now you really make me sound like a looney tooney! I need a hobby!
 
Jay, Picked up some awf's today and saw the statements, warning may contain black walnut fibers. and may not be safe for equine use.

Have you seen this before???


thanks
 
blues said:
Jay, Picked up some awf's today and saw the statements, warning may contain black walnut fibers. and may not be safe for equine use.

Have you seen this before???


thanks
Click to expand...

blues,

I have heard it mentioned but I do not know why it may cause issue's with equine. But it must irritate them in some way?
 
Status
Not open for further replies.

Similar threads

Ranckie
Harmon Insert Not Burning Correctly
Replies
2
Views
561
The Pellet Mill - Pellet and Multifuel Stoves
Ranckie
Ranckie
J
Xtrordinair 44 Elite experience
Replies
0
Views
2K
Travis Industries: Lopi, Avalon, FPX
jnewman67
J
notch
2022-2023 Northeast, Vermont and Green Supreme
Replies
2
Views
4K
2023-2024 Pellet FUEL reviews-opinions-questions
lowb35
L
K
Few Questions ? Pellet brand 21=22? Controlling heat? Negative air pressure
Replies
7
Views
2K
The Pellet Mill - Pellet and Multifuel Stoves
tlc1976
tlc1976
C
  • Locked
6039 Corn/Pellet stove fixes
Replies
7
Views
2K
The Pellet Mill - Pellet and Multifuel Stoves
Cornfusion
C
Top Bottom
Back