Dead tree salvage

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

wetwood

Member
Dec 3, 2009
175
Had an afternoon free to drag out those fallen ash trees. Just the lower ends had any real bug damage. Will have to go back and spend some time salvaging the rest of them.
 

Attachments

  • IMG00178a.jpg
    IMG00178a.jpg
    90.8 KB · Views: 511
  • DSC02034a640x480.jpg
    DSC02034a640x480.jpg
    95.1 KB · Views: 509
  • DSC02030a640x480.jpg
    DSC02030a640x480.jpg
    89.3 KB · Views: 491
I like that trailer. Looks stout!
 
’bert said:
I like the toys too, just need to repaint the tractor to go with the trailer. Can you pick the front of the trailer up to dump it?

lol paint the trailer to match the tractor I like the Green!
 
Wow. It sure looks strange to see ground that isn't all white!

Looks like that ash also had a rotten spot. Usually one finds those full of carpenter ants.
 
Thanks for the comments. Dad built the trailer nearly 30 years ago out of materials he had on hand to haul a wheel horse lawn mower around. The rear of the trailer has angle iron to hold a set of ramps. The frame is 3/8"x3" angle iron, the cross members are 1/2"x3" angle iron. The fenders are made from the end of an old tank and the floor is made of WWII steel runway mats. The biggest drawback is that the antique truck axle is welded to the frame (don't want to hit a pothole at highway speed :ahhh: ). The trailer is tongue heavy, it's made of 3 thick wall pipes inside each other. Takes 2 of us to pick it up and hold it. Last fall it was a family project, my wife, 2 sons and I took it apart, replaced all the wood, painted it, replaced the lights/wiring and put new 31x10.5 15 tires on the wheels. Got a new jack stand to weld on, but I had to move my 220 outlet and need to get an extension cord for the welder.

The tractor is a 790 but my wife calls it the other woman.

Where we are working is in an old shelter belt in the bottom of a waterway. I shoved all the compost, fallen branches and dead vegetation out of the way with the loader. It has been a dry winter so the ground has dried up enough we can get to the fallen trees now. It got up to almost 60 that day and the ground was starting to get mushy. Going to try and get the rest of them this weekend.
 
Status
Not open for further replies.