Cut your found firewood to consistent length and leave stubs, or split the difference and have odd l

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
LOL... after seeing all the pretty stacks I wondered if I was the only scrounger who had to do this. Glad to see it's a problem with y'all too! The city cuts most of my wood but usually to 20" lengths. My stove only handles 18". The first few loads I would try to cut them in half and have 2- 10" pieces, but now I just wack off the end and have a chunk left with the right length. I had a double row fall over this year and most the reason was those short lengths. This year I'm going with a HH to see how it works and then maybe just the old wood stack where you pile it up on end and it makes a little messier HH looking pile. My dad was burning all those chunks in his open fireplace, but quit after 2 rolled out and burned his HW floor. Now I put them in the can and save for later when I just want a warming fire for the night.
 
I shoot for 16" but if I had a 2' log, I'd prefer two 12's.

While my stacks aren't too pretty, they're pretty sturdy. Use the same basic technique to build a stack as I'd use to build a stone wall. New England granite ain't uniform, so it needs to be self-reinforcing.
 
When I posted pictures of some of my wood piles I was simply amazed at the comments I got about how nice and neat they were. I'd actually given it very little thought and that is just how I've always stacked. I don't stack to make anything look pretty but I don't like it looking sloppy either. It takes no more time and a wood pile does look a little better if it is neatly stacked.

Now for the length. I have always cut in differing lengths and the reason is knots and crotches. I hate having a crotch in the middle of a log. To get away from that, I'll usually end up with a piece either longer or shorter than normal. I've never found this a problem during stacking either.
 
Status
Not open for further replies.