How many Jelly Beans,....I mean cords ? W/ pics

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

deerhntr

Member
Mar 25, 2009
129
Kutztown.PA
Split some oak for next season last week, and thought I would get the forum to hazard a guess or two on how much is in the pile. Might be fun to see how close your guess is to the final result. I am stacking now in full cords, the lengths of the splits are 24", so 2 rows 4' high x 8' long. I have a couple more log truck loads coming, so I need to get my "processing area" cleaned up. I will post the result of the yield when the stacks are finished.
 

Attachments

  • wood2.jpg
    wood2.jpg
    76.6 KB · Views: 811
  • wood1.jpg
    wood1.jpg
    66.1 KB · Views: 840
I will guess at 6
 
I just stacked a pile about that size and I'm guessing 3 cord.
 
The one below stacked up to about 4 so I think it's more then that. Pictures are always tough to judge.

P1170019.jpg
 
3-4 cords
 
Is there a prize if the guess is correct? If not, I don't want to play. :)

Seriously, just toss it in a truck and drop on my driveway. I will tell everyone what it stacks up to be! :)

Shari
 
I'm not sure about the OP on how many cords are there but I'm betting there are about 9 cords in these pictures.

4-4-09e.gif


4-4-09f.gif
 
Shari said:
Is there a prize if the guess is correct? If not, I don't want to play. :)

Seriously, just toss it in a truck and drop on my driveway. I will tell everyone what it stacks up to be! :)

Shari

Of course there is a prize! The winner gets to help me with the next 2 log truck loads. ;-)

But seriously, you folks are real good with the guess!. But I already knew that. It is all done, finished this morning. I will post the answer this evening. Let folks have the time to hazard a few more guesses, and I have to get some real accurate measurements, since I see a couple of swags that contain 2 decimal places! :lol:

This wood is from a log truckload I got last summer for $550. I wanted to get an accurate count of what a truckload would yield, so I knew the next time if I was getting a good deal. Overall, I think it worked out great. Much easier that cutting trees down myself. The logs were uniform, which made the cutting and splitting very easy. I have a mingo marker, and it also worked great for marking my 24" cuts on the logs. I'm pretty sure my time spent to cut a log truck load would far exceed the $550 for the load.
 
We're using "The Price is Right" rules right?

if so i guess 2.79
 
I'm guessing three or four, too. (3 or 4 x 128cu ft)

But I haven't stacked wood in a pile like that for a long time and it was just a cord at the time at the end of the driveway.
 
Pile looks about 7' high by 18' across. Using a formula that I use to estimate firewood piles with, I came up with just about 600 cu.ft. tossed in a pile. Using 180 cu.ft. tossed = 1 full cord stacked, I come up with 3.33 cord. Let's call it 3 1/2 cord.
 
three cords
 
The Wood Dog said:
Shari
Just another question about your wood storage system. How high approx are the upright pallets..are they over your head ?

48" tall with another pallet horizontal on top for winter.

Shari
 
O.K. The time has come to bring an end to all the suspense and excitement, and announce how many cords. So......gorsuchmill...... COME ON DOWN, you are the winner of the "Cord guess is right". I came up with 4.625 cords. gorsuchmill guessed 4.51, and zapny was a close second with 4.5. The "0.625" part of the wood is 1/2 a full cord 2'x4'x8', plus 2'x1'x8'(See the pic).

So, my yield for my log truck load was 7 full cords, split and stacked. I had already done some ash that made up the balance a couple of weeks ago. So that was ~$79/cord for ash and oak. Not bad, and I was able to eliminate the harvest portion of the work. It was a reasonable trade of time and effort for $$s.

This was fun, thanks everyone, and have fun stacking and splitting for next season!!
 

Attachments

  • wood3.jpg
    wood3.jpg
    71.4 KB · Views: 401
  • wood4.jpg
    wood4.jpg
    80.9 KB · Views: 389
Battenkiller said:
Pile looks about 7' high by 18' across. Using a formula that I use to estimate firewood piles with, I came up with just about 600 cu.ft. tossed in a pile. Using 180 cu.ft. tossed = 1 full cord stacked, I come up with 3.33 cord. Let's call it 3 1/2 cord.


Battenkiller,


I wish I had your formula before I stacked the wood. I didn't make any measurements, but I will next time. The pic was a little deceiving.

Would you mind sharing your formula?
 
Status
Not open for further replies.