My wood pile for 2010-2011 and 2011-2012... I hope. (with pictures)

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
My lawn chair for having an evening brew and playing with the woodpile cat is between the separate season's woods stacks.
 
Archer39 said:
sksmass said:
What are the yellow ropes on some of the stacks for? Are they structural or are they guidelines for stacking them straight?

structural you can say. They are keeping the tops of the t-post stakes from bending out too much.

A better way to do that is to run the rope across the stack when you have about half of it stacked. Then tie each end to a post and stack the other half on top of the rope. Since I started doing that probably fifty or sixty cords ago I have never had a stack fall.
 
BrotherBart said:
Archer39 said:
sksmass said:
What are the yellow ropes on some of the stacks for? Are they structural or are they guidelines for stacking them straight?

structural you can say. They are keeping the tops of the t-post stakes from bending out too much.

A better way to do that is to run the rope across the stack when you have about half of it stacked. Then tie each end to a post and stack the other half on top of the rope. Since I started doing that probably fifty or sixty cords ago I have never had a stack fall.

That's a great idea BB
 
BrotherBart said:
Archer39 said:
sksmass said:
What are the yellow ropes on some of the stacks for? Are they structural or are they guidelines for stacking them straight?

structural you can say. They are keeping the tops of the t-post stakes from bending out too much.

A better way to do that is to run the rope across the stack when you have about half of it stacked. Then tie each end to a post and stack the other half on top of the rope. Since I started doing that probably fifty or sixty cords ago I have never had a stack fall.

Thanks for the idea, i will give that a try next time.
 
Oh and ya gotta love that naturally debarked oak. I see ya have lots of that.[/quote]

it stops about 2 inches short of the plate. I think they designed it this way to prevent fingers and stuff from getting chopped off but i really don't know. It is a pain in stringy stuff but oak maple and ash its no biggy because normally you can pull apart the splits once the wedge is half way in.[/quote]

Nice stacks! Nice to be ahead! Same splitter here (borrowed from neighbor) and, yes, stops ~ 2-3" short - fine for ash and red oak, but hard maple and beech etc., can be a pain - need to turn round and finish split from other side, but not too often - still a big time saver if you are set up right and ready to split fast. Good luck! Cheers!
 
i wonder if that ram has the length to extend all the way out to the plate or atleast to within 1/2" of it? It would be no problem taking the wedge off and cutting off the piece that makes contact with the end plate. hmmm i am going to have to take some measurements.
 
Im sure the ram is capable of fully extending. They wouldn't have put that stop in if it didn't. Matter of fact yesterday when i was usin it i had to pry apart a piece of cherry. When the cherry finally came apart i smashed my finger between the beam and the split and cut it down to the bone. Go figger huh?
 
Archer39 said:
i wonder if that ram has the length to extend all the way out to the plate or atleast to within 1/2" of it? It would be no problem taking the wedge off and cutting off the piece that makes contact with the end plate. hmmm i am going to have to take some measurements.

Hmmmm....wonder if you could weld additional plate to stop in order to make up the difference? Cheers!
 
NH_Wood said:
Archer39 said:
i wonder if that ram has the length to extend all the way out to the plate or atleast to within 1/2" of it? It would be no problem taking the wedge off and cutting off the piece that makes contact with the end plate. hmmm i am going to have to take some measurements.

Hmmmm....wonder if you could weld additional plate to stop in order to make up the difference? Cheers!

I could but i don't have a plasma cutter to cut it like it would need to be. I suppose i could cut it with the torch and grind it to make it look decent.
 
Better looking than any fence I've ever seen.
Green grass & trees sprouting, that adds good color to the pics, (Next month for that to happen here)
Good job.
Looks great
 
sksmass said:
What are the yellow ropes on some of the stacks for? Are they structural or are they guidelines for stacking them straight?

Oh the yellow ropes . . . they're for crowd control as everyone in the neighborhood has been flocking here to check out these stacks of wood. To keep the admiring throng back the yellow rope is being used during Visitor Hours to keep folks back a respectable and safe distance. ;) :)
 
Archer39 said:
Flatbedford said:
Very nice! Lots of work there. Lots of heat there too! Do you often find yourself standing out there and just staring at it all?

Yep, and my wife thinks i am crazy!

LOL arent we all a bit of crazy about the wood :)
 
Rustaholic said:
That is a beautiful bunch of wood.
It is better than money in the bank.
Where did the wood come from?

most of it was from my grandmothers house. In case your wondering I'm 22 that's why my grndmother is still around. Everything at her house is in a swamp and over bolders so it was a lot of work. None of it was easy. Some I found on craigslist, the walnut.
 
Nice looking stacks you got there. A nice place to enjoy a beer after a hard day of splitting!!
 
Status
Not open for further replies.