I need hydralic hose for my ramsplitter 1/2 inch by 20 inches with a pressure fitting. I am ordering it from Ramsplitter, but I would like to know if I anyone else sells it. Not just hyrdralic hose, but the special fitting. Thank You Dennis Hershey
Hydraulic Hose with Pressure fitting
- Thread starter handss
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
SolarAndWood
Minister of Fire
NAPAs around here make hoses. Pretty quick and painless if you take one in for them to copy. Most I have had made are 30 to 40 bucks.
I have had good luck with Ramsplitter, re the one part I needed. I think their components are all off the shelf parts, available at any farm store, or online.
One thing, the hoses on my splitter I got from them are rated at 3500 psi. You might want to check the quality of hose that you need. Sometimes getting a slightly longer hose can allow you to avoid a right angle on your hydraulic fittings.
One thing, the hoses on my splitter I got from them are rated at 3500 psi. You might want to check the quality of hose that you need. Sometimes getting a slightly longer hose can allow you to avoid a right angle on your hydraulic fittings.
- Status
Similar threads
