CLEARANCE $171.03 MTD 8 ton LOG SPLITTER

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
Bass,,,I had no problem whatsoever....I just had the store clerk, scan the item......and it came up 171.03,,,,it was also posted on the clearance sticker on the splitter....you should take a ride there to confirm...i think its worth it...good luck......Joey
 
Joey said:
Bass,,,I had no problem whatsoever....I just had the store clerk, scan the item......and it came up 171.03,,,,it was also posted on the clearance sticker on the splitter....you should take a ride there to confirm...i think its worth it...good luck......Joey
Click to expand...

Called the Massena store the other day and the sku number was not in the system, it was worth the call.

zap
 
Badfish740 said:
basswidow said:
I found two at the bridgewater store, but they won't budge from a price of $ 412.00 saying it was as low as it would go on clearance.

Not sure what the deal is?

Joey - was your Home Depot telling you it was $ 412 and then when they scanned it - $ 173?

I may take a drive to bridgewater - but I am not interested in these at $ 412.

Thanks.
Click to expand...

Somethin don't sound right there...I would take a printout of the picture fire posted that clearly shows the SKU and price and ask to speak with a manager.
Click to expand...

dID THEY SCAN THE BARCODE or put the 6 digit sku# in the computer to confirm or did they say it was $412.
 
Over the phone. I asked them to verify the price in the computer.

It's a hour drive for me, perhaps I can send the wife down durning the day. Disappointed if she drives all that way and they don't honor the price.
 
You stole it!
 
Status
Not open for further replies.

Similar threads

M
Huskee Log splitter - new motor, but shorter shaft - How can I make this work?
Replies
4
Views
1K
The Gear
Ashful
Ashful
KDubU
Question on Existing Liner and New Liner
Replies
5
Views
919
The Hearth Room - Wood Stoves and Fireplaces
KDubU
KDubU
T
Newbie Can't get Electric Splitter to work
Replies
5
Views
593
The Gear
Eman85
E
M
Cylinder Rod Stuck in Out Position on Ariens 27 Ton Splitter
Replies
17
Views
1K
The Gear
salecker
salecker
A
Canadian Tire Yardworks 5-ton splitter 060-3895-8 pusher plate & dual wedge bolts don't align
Replies
2
Views
596
The Gear
Andrew Baumgartner
A
Top Bottom
Back