Which side is blower power cord on Regency i2400?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

skyhawktom

New Member
Oct 17, 2010
1
Massachusetts
Hello all,

Can any of you please tell me which side the blower power cord is on on the Regency i2400 wood burning insert? The pdf of the online owner's manual seems to show it on the left, however I found a picture online that has it on the right.

Your help would be greatly appreciated.

Thanks,
Tom
 
When looking at the stove, my power cord is on the left. There is a cut-out on the right, so it may be possible to switch sides.
 
I have a Hampton HI300 which I believe is the same thing. Facing the insert the cord is on the left, with a cord cut-out also on the right.
 
There's a small grommet that protects the power cord from the sharp edges of the blower housing.
You can install this on either side, but you have to snake the wiring thru on the front side - between
the blower body & the housing - away from the insert body & the HEAT.
 
Status
Not open for further replies.