No longer a wood stove virgin

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

pegasus

Member
Apr 3, 2010
14
Muncie, IN
Fired my stove up for the first time last night and it went great. I have to thank hearth.com for all of the tremendous information, advice, and links that made it all possible. My wife and I did the entire project of installing the stove, pipe, and chimney liner by ourselves. Including the cost of the used wood stove, the price of installation was around $800. There was a little smoke associated with some oil that had soaked into the cast iron causing us to open the windows for an hour, but the stove put off enough heat to warm things back up. The stove maintained over 500 degrees fahrenheit for more than 2 hours on no more than an arm load of oak and black walnut. The wood stove is not my primary heat source but I will use it when we lose power,holidays and when the temps get down around 0 degrees fahrenheit.

Thanks again,
Ryan
 
outstanding! Pics!?!
 
Oh, I need to get some pics of the fire that has made my wife warm as well as my house, if ya know what I mean!
 
pegasus said:
Fired my stove up for the first time last night and it went great. I have to thank hearth.com for all of the tremendous information, advice, and links that made it all possible. My wife and I did the entire project of installing the stove, pipe, and chimney liner by ourselves. Including the cost of the used wood stove, the price of installation was around $800. There was a little smoke associated with some oil that had soaked into the cast iron causing us to open the windows for an hour, but the stove put off enough heat to warm things back up. The stove maintained over 500 degrees fahrenheit for more than 2 hours on no more than an arm load of oak and black walnut. The wood stove is not my primary heat source but I will use it when we lose power,holidays and when the temps get down around 0 degrees fahrenheit.

Thanks again,
Ryan

Ryan, you very well might find yourself using that stove more than you think. Once you get used to the wood heat it is difficult to go without it!
 
Backwoods Savage said:
pegasus said:
Fired my stove up for the first time last night and it went great. I have to thank hearth.com for all of the tremendous information, advice, and links that made it all possible. My wife and I did the entire project of installing the stove, pipe, and chimney liner by ourselves. Including the cost of the used wood stove, the price of installation was around $800. There was a little smoke associated with some oil that had soaked into the cast iron causing us to open the windows for an hour, but the stove put off enough heat to warm things back up. The stove maintained over 500 degrees fahrenheit for more than 2 hours on no more than an arm load of oak and black walnut. The wood stove is not my primary heat source but I will use it when we lose power,holidays and when the temps get down around 0 degrees fahrenheit.

Thanks again,
Ryan

Ryan, you very well might find yourself using that stove more than you think. Once you get used to the wood heat it is difficult to go without it!

Mmm hmmm . . . thinking the same thing . . . many of us started the whole wood burning experience thinking we would just burn on weekends and evenings . . . and in just a few weeks and burns decided that the heat, the view and the savings made switching over to 24/7 burning worth the effort.
 
Status
Not open for further replies.