Koal Keeper - anyone ever try one?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
NH_Wood

NH_Wood

Minister of Fire
Dec 24, 2009
2,602
southern NH
NH_Wood said:
Thought this looked like a good idea. Was going to buy a regular shovel and drill holes, but, was cheap enough to try the pre-made one. Cheers!

http://www.northlineexpress.com/item/5HY-ASB-KK24/24-Koal-Keeper
Click to expand...

NH_Wood we bought one last year and still use it. This year we use it less then we did last year at this time just because we burn our coals down more. Usually on Sundays I'll clean the ashes out and if we have coals that is when I use it.


zap
 
They was up like a pretzel, and that's B4 they get hot. Yer better off learning how to burn your coals down.
 
Have one, it's OK. I try to avoid using it and do as mentioned previously, or, toss the chunks with the ashes. No matter how careful, it amplifies the ash distribution outside of the stove when used.

Warning, it is made in china, and when first used, the black paint vaporizes and puts off extremely noxious fumes, after the "burn in", the fumes are not as obvious, but if you have reactive airways or are sensitive to fumes have somebody around just in case.
 
I know how to burn the coals down, but thought this would be a good way to separate the hot coals from ash before a reload. I ordered one - I guess we'll see. I'll put in an outside fire first to burn off the fumes. Thanks! Cheers!
 
There was a thread on this subject last year. Alot people made their own coal rakes. The longer the handle the better. I made mine from a spatula designed for an outside grill equipped with a golf grip. I cut off the end and bent it 90 degrees. It works well for seperating the coals from the ash. Seems to me a rake is alot better than that thing and it will be alot cooler on the hands. Basically I normally push all the ashes and coals to the back, then rake the coals forward. Most of the new stoves have the air in the front to keep the window clean. For overnight burns I try to get all the coals forward and put a big split or round in the back so that it catches slowly, it seems to really help on the overnight burn.
 

Attachments

  • coalrake.jpg
    coalrake.jpg
    65.4 KB · Views: 689
NH_Wood said:
I know how to burn the coals down, but thought this would be a good way to separate the hot coals from ash before a reload. I ordered one - I guess we'll see. I'll put in an outside fire first to burn off the fumes. Thanks! Cheers!
Click to expand...

NH_Wood, could you please explain this? Am I reading right that you do this on each reload? The reason I ask is that you should not need to do it. The only time to separate is when you empty the ashes and that is usually ever several days or a week, etc.
 
Backwoods Savage said:
NH_Wood said:
I know how to burn the coals down, but thought this would be a good way to separate the hot coals from ash before a reload. I ordered one - I guess we'll see. I'll put in an outside fire first to burn off the fumes. Thanks! Cheers!
Click to expand...

NH_Wood, could you please explain this? Am I reading right that you do this on each reload? The reason I ask is that you should not need to do it. The only time to separate is when you empty the ashes and that is usually ever several days or a week, etc.
Click to expand...

Dennis - I'm still learning a lot, so I'm probably off base - here's my explanation: as I pull the coals to the front, mainly after the coals have burned down a lot (more ash than coals), I find that I'm pulling a lot of ash with the coals. I figured that I should have mainly coals pulled to the front/center, with the ash in the remainder of the box, in order to let the primary air get at the coals best. This is how I would be doing it for each reload, except when reloading during colder weather, when many coals are available and splits can be simply added to the box with no raking (perhaps morning reloads will require more raking). Perhaps what I'm doing is a shoulder season thing, since I can't reload too quickly or suffer from a really hot house. Or, as I mentioned earlier, perhaps I'm doing something wrong! Wouldn't surprise me - I have a whopping 2 months of burning experience under my belt! Cheers!
 
madison said:
Nice putter .... Is the rest of that club buried into a tree?
Click to expand...

No, but perhaps I should put this club in my bag for when I can not find a rake :coolgrin:
 
I have one. Bought it last year. I don't really use it right now. But when the colder weather comes and I start burning 24x7, I'll use it a couple of times a week to separate the coals and get the ashes out.
 
Status
Not open for further replies.

Similar threads

Pelletman308
Pellet shootout! 6 brands tested only one winner
Replies
7
Views
1K
2023-2024 Pellet FUEL reviews-opinions-questions
bogieb
bogieb
C
Clay flue break out
Replies
8
Views
1K
The Hearth Room - Wood Stoves and Fireplaces
SpaceBus
SpaceBus
A
How can I achieve secondary burns in this wood stove?
Replies
22
Views
4K
The Hearth Room - Wood Stoves and Fireplaces
Ahmet94
A
L
Trying to mitigate chimney effect...HELP!
Replies
17
Views
2K
The Hearth Room - Wood Stoves and Fireplaces
lukeg199
L
C
Regency R5/R7 - Information, Best Practice, Maintenance Questions
Replies
2
Views
2K
Regency
begreen
begreen
Top Bottom
Back