Fiskars X-series Axes and Striking -- they're X-treme!! (new 36" Splitter too)

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
bboulier said:
I have the Fiskar's Super Splitter. I really like it a lot. Does great work. But, I think it would be safer and more efficient to have a longer handle, so I would be keen on trying the X-27.
Click to expand...
My thoughts exactly. Though I'd also be interested to try a 6# version just to see...

Those looking to buy the original 4.5# SS, try here: http://www.acehardwareoutlet.com/ProductDetails.aspx?SKU=7164692
$39 shipped
 
Bigg_Redd said:
Jeff S said:
I know a few all ready Fiskars users that will be pleased with new longer handled version.
Click to expand...

The only people that gripe about the short handle are the people who haven't actually used one.
Click to expand...

I'd have to asume it is you who has used neither or certainly not both. As soon as I aquired the long handled version, the short one went in the truck tool box for "emergencies". Next month wehn I get the 36", the 28" will go in the truck, and the 22" in the shed, where it may live forever, other than an ocasional camping trip.

I like splitting rounds on the ground. I can just do that with the 28, but not effeicently. With the 36 it will be a joy. The 36 has two advantages, faster head speed for the same swing speed, and when splitting on the ground, more momentum.
 
Dune said:
Bigg_Redd said:
Jeff S said:
I know a few all ready Fiskars users that will be pleased with new longer handled version.
Click to expand...

The only people that gripe about the short handle are the people who haven't actually used one.
Click to expand...

I'd have to asume it is you who has used neither or certainly not both. As soon as I aquired the long handled version, the short one went in the truck tool box for "emergencies". Next month wehn I get the 36", the 28" will go in the truck, and the 22" in the shed, where it may live forever, other than an ocasional camping trip.

I like splitting rounds on the ground. I can just do that with the 28, but not effeicently. With the 36 it will be a joy. The 36 has two advantages, faster head speed for the same swing speed, and when splitting on the ground, more momentum.
Click to expand...

I agree with Bigg_Redd and look forward to the new model.
 
bboulier said:
Dune said:
Bigg_Redd said:
Jeff S said:
I know a few all ready Fiskars users that will be pleased with new longer handled version.
Click to expand...

The only people that gripe about the short handle are the people who haven't actually used one.
Click to expand...

I'd have to asume it is you who has used neither or certainly not both. As soon as I aquired the long handled version, the short one went in the truck tool box for "emergencies". Next month wehn I get the 36", the 28" will go in the truck, and the 22" in the shed, where it may live forever, other than an ocasional camping trip.

I like splitting rounds on the ground. I can just do that with the 28, but not effeicently. With the 36 it will be a joy. The 36 has two advantages, faster head speed for the same swing speed, and when splitting on the ground, more momentum.
Click to expand...

I agree with Bigg_Redd and look forward to the new model.
Click to expand...

So you're okay with the short handle and you're looking forward to the new model.

Huh?
 
I have the 28-inch model Fiskars SS. It's splitting abilities are formidable, but the short handle scares the cr@p out of me. I had an incident two weeks ago where it bounced off a hickory round and made a nick in my shin. One inch to the left and that would have been a trip to the emergency room. a Longer handle would put the user farther away from the round and impart a greater degree of safety.
 
Bigg_Redd said:
Jeff S said:
I know a few all ready Fiskars users that will be pleased with new longer handled version.
Click to expand...

The only people that gripe about the short handle are the people who haven't actually used one.
Click to expand...

Yup. Probably the same ppl who gripe about their EPA stoves not burning green firewood lol.
Personal, the amount of 'extra work' lifting a log onto a splitting platform/stump is negated by the fact that
you have a hard surface to split on, which increases the force of each swing from the tool.
Also, I use a tire to hold rounds so I can cut a round into many splits and not picking them off the ground to stack em ;)
 
I'll admit that I'm far from being a seasoned wood burner/splitter. This is my second year burning wood and all of my current stock was split by hand last winter (roughly 5 cords).

I think 5 cords is enough to chime in and say I'll never buy a Fiskers w/ a short handle. I stand 6', 3" and yes I'm terrified to swing one of those damn axes; I'm not in the market for a prosthetic leg....

Side Note: I'm young, I don't mind the extra work involved w/ lifting logs onto a stump. For one, I'm tall. Two, it's good exercise and it keeps me in shape.

Now that I have a splitter, I still find myself splitting w/ a maul, sledge and wedges. Infact I'm cocky enough to say I can beat most hydraulic splitters, if I'm working w/ good clean grain rounds.
 
chad101 said:
I'll admit that I'm far from being a seasoned wood burner/splitter. This is my second year burning wood and all of my current stock was split by hand last winter (roughly 5 cords).

I think 5 cords is enough to chime in and say I'll never buy a Fiskers w/ a short handle. I stand 6', 3" and yes I'm terrified to swing one of those damn axes; I'm not in the market for a prosthetic leg....

Side Note: I'm young, I don't mind the extra work involved w/ lifting logs onto a stump. For one, I'm tall. Two, it's good exercise and it keeps me in shape.

Now that I have a splitter, I still find myself splitting w/ a maul, sledge and wedges. In fact I'm cocky enough to say I can beat most hydraulic splitters, if I'm working w/ good clean grain rounds.
Click to expand...

Young enough.
 
jlove1974 said:
Bigg_Redd said:
Jeff S said:
I know a few all ready Fiskars users that will be pleased with new longer handled version.
Click to expand...

The only people that gripe about the short handle are the people who haven't actually used one.
Click to expand...

Yup. Probably the same ppl who gripe about their EPA stoves not burning green firewood lol.
Personal, the amount of 'extra work' lifting a log onto a splitting platform/stump is negated by the fact that
you have a hard surface to split on, which increases the force of each swing from the tool.
Also, I use a tire to hold rounds so I can cut a round into many splits and not picking them off the ground to stack em ;)
Click to expand...

I am calling B.S. on this. I bought the 22, splits wood great, but real sucky hard to use with the short handle. Bought the 28, much better, still too short. Waiting for the 36. Have no doubt I will be happy with it.
 
Dune said:
jlove1974 said:
Bigg_Redd said:
Jeff S said:
I know a few all ready Fiskars users that will be pleased with new longer handled version.
Click to expand...

The only people that gripe about the short handle are the people who haven't actually used one.
Click to expand...

Yup. Probably the same ppl who gripe about their EPA stoves not burning green firewood lol.
Personal, the amount of 'extra work' lifting a log onto a splitting platform/stump is negated by the fact that
you have a hard surface to split on, which increases the force of each swing from the tool.
Also, I use a tire to hold rounds so I can cut a round into many splits and not picking them off the ground to stack em ;)
Click to expand...

I am calling B.S. on this. I bought the 22, splits wood great, but real sucky hard to use with the short handle. Bought the 28, much better, still too short. Waiting for the 36. Have no doubt I will be happy with it.
Click to expand...

if you are calling BS on the fact that splitting on a hard surface vs the moist or even frozen winter ground transmits more force to the wood being split, you need to go back to HS physics class.

22" handle = long hatchet
28" is a scandinavian standard handle length for axes less than 2.2Kgs for about 1000 years http://www.gransfors.us/AncientAxeBook.pdf
I guess they aren't tall, those crazy Swedes nor do they know anything about chopping wood :)

Also the axe everyone wants has been made by Helko for a while now. 1500G Tomahawk http://www.hartvilletool.com/product/14666
longer handles = slow axe head speeds
 
jlove1974 said:
Dune said:
jlove1974 said:
Bigg_Redd said:
Jeff S said:
I know a few all ready Fiskars users that will be pleased with new longer handled version.
Click to expand...

The only people that gripe about the short handle are the people who haven't actually used one.
Click to expand...


Nope, just this part.

By the way, my last name is Christiansen, and I am a blacksmith. I know a thing or two about scandanavian axes.
Click to expand...
Click to expand...
Click to expand...
 
jlove1974 said:
if you are calling BS on the fact that splitting on a hard surface vs the moist or even frozen winter ground transmits more force to the wood being split, you need to go back to HS physics class.
Click to expand...

Of course the force is "more" on a hard surface, but is it significant? The physics aren't that simple.
 
jlove1974 said:
longer handles = slow axe head speeds
Click to expand...

What are you talking about? Nothing could be further from the truth.
 
pretty simple physics, all of it

An axe, a maul are all basically hammers with built in wedges. Some wedge shapes are more efficient, which is demonstrated by the superior
shapes of the scandi axes and sharp edges vs blunt mauls doing more work with less weight. You have more control with a shorter handle.
The longer handles are 'safer' for people who have no control, evidently

http://en.wikipedia.org/wiki/Hammer#Effect_of_the_head.27s_mass

Effect of the head's mass
The amount of energy delivered to the target by the hammer-blow is equivalent to one half the mass of the head times the square of the head's speed at the time of impact (). While the energy delivered to the target increases linearly with mass, it increases geometrically with the speed (see the effect of the handle, below). High tech titanium heads are lighter and allow for longer handles, thus increasing velocity and delivering more energy with less arm fatigue than that of a steel head hammer of the same weight. As hammers must be used in many circumstances, where the position of the person using them cannot be taken for granted, trade-offs are made for the sake of practicality. In areas where one has plenty of room, a long handle with a heavy head (like a sledge hammer) can deliver the maximum amount of energy to the target. It is not practical to use such a large hammer for all tasks, however, and thus the overall design has been modified repeatedly to achieve the optimum utility in a wide variety of situations.

Effect of the handle
The handle of the hammer helps in several ways. It keeps the user's hands away from the point of impact. It provides a broad area that is better-suited for gripping by the hand. Most importantly, it allows the user to maximize the speed of the head on each blow. The primary constraint on additional handle length is the lack of space in which to swing the hammer. This is why sledge hammers, largely used in open spaces, can have handles that are much longer than a standard carpenter's hammer. The second most important constraint is more subtle. Even without considering the effects of fatigue, the longer the handle, the harder it is to guide the head of the hammer to its target at full speed. Most designs are a compromise between practicality and energy efficiency. Too long a handle: the hammer is inefficient because it delivers force to the wrong place, off-target. Too short a handle: the hammer is inefficient because it doesn't deliver enough force, requiring more blows to complete a given task. Recently, modifications have also been made with respect to the effect of the hammer on the user. A titanium head has about 3% recoil and can result in greater efficiency and less fatigue when compared to a steel head with about 27% recoil. Handles made of shock-absorbing materials or varying angles attempt to make it easier for the user to continue to wield this age-old device, even as nail guns and other powered drivers encroach on its traditional field of use.
 
what part of that tells me that the head travels slower with a longer handle?

They say that the problem with longer handle is control/aim. Well I can hit the same spot over and over, so aim isn't a concern. SO, given that aim is not a factor, then give me a better reason that a longer handle is worse...
 
Dune said:
jlove1974 said:
longer handles = slow axe head speeds
Click to expand...

What are you talking about? Nothing could be further from the truth.
Click to expand...
I'm talking about a slower wind-up until you hit the wood. It's not a constant speed, it peaks.
A 28" handle is going to have a faster head speed due to faster wind-up (and less work) than a 36"
but you might gain some of that back due to increased leverage ratio. But as noted above, it increases fatigue.
 
Dune said:
jlove1974 said:
longer handles = slow axe head speeds
Click to expand...

What are you talking about? Nothing could be further from the truth.
Click to expand...

I'm scratching my head on that too. Maybe if you plan on "throwing" your axe?!

I would also like to state that these ancient axes were designed to be multipurpose tools, for hunting, self defense, etc. A long handle would get in way and make the user less mobile.
 
you ever spin on a swing or merry go round as a kid? what happened when you put your arms out? You slowed down.
When you pulled your arms in, you spin faster. That's wind-up speed. You are the one doing the work, not the axe
 
jlove1974 said:
Dune said:
jlove1974 said:
longer handles = slow axe head speeds
Click to expand...

What are you talking about? Nothing could be further from the truth.
Click to expand...
I'm talking about a slower wind-up until you hit the wood. It's not a constant speed, it peaks.
A 28" handle is going to have a faster head speed due to faster wind-up (and less work) than a 36"
but you might gain some of that back due to increased leverage ratio. But as noted above, it increases fatigue.
Click to expand...

That sounds logical.

But a shorter handle is still harder on the back when you're hunched over swinging a glorified hatchet.
 
You want to talk physics, lets talk physics. The longer the moment arm, the faster the linear speed at the end of the arm for the same rotary speed. Period, end of discussion. Everything else is B.S.
 
I split wood for years with an 8lb maul with a sledgehammer handle. I broke several of them.
When I first used my friends fiskars pro splitter, I thought the same thing this thing is too short.

After I adapted and started using a 18-20" high splitting block of hard oak or other solid wood, along with the tire or bungee cord trick, I split more wood with less work.

Y'all take that anyhow you want. I see it as doing more work with less effort due to a combination of all the above mentioned factors. Get a long handled version with a heavier
head if that floats your boat. It's nice, but certainly not necessary once you learn how to use a tool correctly
 
Dune said:
You want to talk physics, lets talk physics. The longer the moment arm, the faster the linear speed at the end of the arm for the same rotary speed. Period, end of discussion. Everything else is B.S.
Click to expand...
You are totally right. Too bad it's not a linear speed we are talking about. It's a swinging motion that has peak speeds. Because it's a compromise.

Do you know how a trebuchet works? It's the same principle. A longer arm requires more weight to throw it but then at some point the mechanical advantage of the longer arm kicks in and gives you more force, depending on the length of the throw.
 
Whatever buddy. Come on up north here and we'll kill a tree and see if you can split more wood with your 22" axe than I can with my 36" axe.
 
jlove1974 said:
Dune said:
You want to talk physics, lets talk physics. The longer the moment arm, the faster the linear speed at the end of the arm for the same rotary speed. Period, end of discussion. Everything else is B.S.
Click to expand...
You are totally right. Too bad it's not a linear speed we are talking about. It's a swinging motion that has peak speeds. Why don't they use a longer baseball bat in the major leagues than the minor leagues? Because it's a compromise
Click to expand...

Hang on just a second... This discussion is intriguing.

IMHO Here is what happened when you switched from the 36" handle 8# maul to the 28" handle 4.5# fiskars:
First you learned the two tools don't swing the same and adapted a new approach to splitting.
You have developed faster swinging speeds that more than make up for the loss of mass in the striker. (Also a more balanced and efficient transfer of striking energy)

Now a new tool comes along - we still DO NOT KNOW (do we?) how much the new fiskars weighs... let's assume it has the same 4.5# head and so the tool weights slightly more. The windup you speak of shouldn't change - how would it? The difference now is the same weight moving at a higher velocity/speed - dropping from a greater height at greater speed. What's not to like?
 
Dune said:
Whatever buddy. Come on up north here and we'll kill a tree and see if you can split more wood with your 22" axe than I can with my 36" axe.
Click to expand...

No thanks. I enjoy my 8 month growing seasons too much to waste a trip up there when it's actually nice. You can enjoy all the 'alternative lifestyles' out on your islands all by yourself ;)

Nice tater chips tho!
 
Status
Not open for further replies.

Similar threads

L
New Quad Outfitter Series-thoughts?
Replies
1
Views
3K
The Pellet Mill - Pellet and Multifuel Stoves
vogelzang87
V
iron
What would you do with ZC door conflict?
Replies
7
Views
950
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
Sean McGillicuddy
  • Locked
Yet more Fiskars splitting axe questions.
Replies
10
Views
3K
The Gear
CountryBoy19
C
PelletPractitioner
New Ravelli RV100 Classic self-install and photos
Replies
17
Views
10K
The Pellet Mill - Pellet and Multifuel Stoves
EncoreInMass
EncoreInMass
OhioBurner©
  • Locked
Putting up Helko Vario against the Fiskars X27
Replies
9
Views
7K
The Gear
OhioBurner©
OhioBurner©
Top Bottom
Back