Firewood wall pass-through (air lock)
- Thread starter semipro
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
OhioBurner©
Minister of Fire
Semipro said:
If you have a tractor with loader maybe you should have done this: https://www.hearth.com/econtent/index.php/forums/viewthread/65541/
►►OhioBurner◄◄™ said:
That's impressive. That's what I want to just on a smaller scale.
SolarAndWood
Minister of Fire
Semipro said:
I don't know, I think your system is just about perfect and it looks good on both sides. If you had your loader at a nice working height, how long and how much effort would it take to fill the pass-through? And, you don't have to worry about a little sway in a tight space with the front end of your tractor in the snow or slop.
firefighterjake
Minister of Fire
Very cool bookshelf/wood storage . . . there's probably a reason for this . . . but why didn't you simply put the hinge on the side instead of at the top of the outer door?
SolarAndWood said:
I think you've found the bug in any plans to use pallets and the tractor; I'd probably damage the structure with the tractor when the wheels or my hands slips.
I'm just going to stick with the the FEL without pallets for now.
firefighterjake said:
The door is pretty heavy and I was concerned about sagging, fit, hiding the hinges, and stresses on the structure. I also though it might be nice to have a roof over my head while loading.
JustWood
Minister of Fire
RAY_PA
Feeling the Heat
gpcollen1
Minister of Fire
Yeah, I would use some rear hatch/door struts for that one. Couldn't be heavier than my 4runner rear door I bet...
http://www.monroe.com/products/accessories_maxlift.asp
http://www.monroe.com/products/accessories_maxlift.asp
CTwoodburner said:
That was my original plan but I'm still undecided. The struts would be the slickest I think..other than something motorized.
RAY_PA
Feeling the Heat
sorry it took so long. My memory isnt what it used to be.
This was in the house when we bought it, so I cant take credit. But it is the cats hindend for keeping the dirt to a minimum and having the wood close to the Summit. (we did install the summit in the existing fireplace). This pass through goes into a hallway from the garage to the basement. So I keep a weeks worth of wood in the garage and fill this bin every morning. I really like it and would have no idea what to do if it wernt there.
This was in the house when we bought it, so I cant take credit. But it is the cats hindend for keeping the dirt to a minimum and having the wood close to the Summit. (we did install the summit in the existing fireplace). This pass through goes into a hallway from the garage to the basement. So I keep a weeks worth of wood in the garage and fill this bin every morning. I really like it and would have no idea what to do if it wernt there.
Attachments
OUr house had a built in area to the left of the fireplace with the same idea in mind. Door on the outside and one trimmed out wainscotting on the inside. THe problem for us was that when it was built there was no house to the the east of us. No that landscaping has matured and a homeis to our eaast it makes the door worthless since you cannot drive up to it with a trailer and in the winter that side of the house is not accessible by vehicle or wheel barrow.
When I recovered the chimney exterior with vinly siding after removing improperly installed facsia (cast stone with water intrusion from not having a wicking system in place). I also removed the exterior access door at that time as well since the design allowed water to get behind the door and was creating a water issue to the structure. So that is all corrected now.
We leave a trailer full in the garage and bring in muck bucket of wood in when burning and it works better and faster than the door thing ever did for us.
When I recovered the chimney exterior with vinly siding after removing improperly installed facsia (cast stone with water intrusion from not having a wicking system in place). I also removed the exterior access door at that time as well since the design allowed water to get behind the door and was creating a water issue to the structure. So that is all corrected now.
We leave a trailer full in the garage and bring in muck bucket of wood in when burning and it works better and faster than the door thing ever did for us.
Cowboy Billy
Minister of Fire
Cool Very nice Job!
I am think about how I want to build a cabin in the next few years at the farm. Since I am going to store the wood in the basement I am thinking of making a dumb waiter to lift my wood up and next to the stove.
Billy
I am think about how I want to build a cabin in the next few years at the farm. Since I am going to store the wood in the basement I am thinking of making a dumb waiter to lift my wood up and next to the stove.
Billy
SolarAndWood
Minister of Fire
Cowboy Billy said:
Our neighbor has one that goes from his lower level into a cabinet right next to the stove in the living room on the main floor. It is sweet.
SolarAndWood said:
This seems to be the way to do it. One load in the tractor almost fills it and is pretty easy to transfer. The chains I had to install on the tractor made a world of difference too.
Although overall not going out at night to haul in wood is better I do still kind of miss the experience... except for the one night when that coon tried to shinny up my leg.
- Status
Similar threads
