I have a accentra, if the burnpot fills with ash the stove starts to burn sooty. I get the lazy flame and black soot ... def a fuel to air prob.. BUT I have cleaned it, changed gaskets and so forth..
Here is the funny part, called dealer and he says his is giving him the same problem! But he can't figure it out either... the only thing left is esp, com blower and circuit board.. he has changed his esp and board and same thing... we are thinking the com blower, but he says he has never seen a bad one that still ran, usually they just stop..
Any ideas?
It's very frustrating
My accentra doesn't have the ddmm port on the front and the white screw is turned all the way to the right
Any help is much appreciated!
Here is the funny part, called dealer and he says his is giving him the same problem! But he can't figure it out either... the only thing left is esp, com blower and circuit board.. he has changed his esp and board and same thing... we are thinking the com blower, but he says he has never seen a bad one that still ran, usually they just stop..
Any ideas?
It's very frustrating
My accentra doesn't have the ddmm port on the front and the white screw is turned all the way to the right
Any help is much appreciated!