My new woodhauler

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

schwaggly

Burning Hunk
Sep 23, 2009
198
n.shore ma
Finally got a truck. I've been kicking myself for years for getting rid of my old toyota 4cyl. So I finally bought a replacement.
The wife protested a bit but since I've gotten it I'm back and forth to H Depot with rocks, mulch and today I'm getting a Kousa tree.
It's a 99 Sierra 1500 ex cab 3 doors no AC and roll down windows. My kids won't let me cart them around in anything else, we'll see
in about that in July.
 

Attachments

  • gmc2.jpg
    gmc2.jpg
    9.2 KB · Views: 470
  • gmc1.jpg
    gmc1.jpg
    8.2 KB · Views: 488
That looks way to nice to be a wood hauler.
 
wkpoor said:
That looks way to nice to be a wood hauler.

+1 93 chevy s-10 no muffler! lol
 
Bravo!

I put a set of Timbren rubber springs on my '08 extended cab. I don't haul far, or fast, but there's no need to tempt the local officials into getting me on their portable scales. Mine handles well loaded or not.

EnjoY!
 
Nice looking truck. Just watch the weight you put in it. I couldn't imagine moving wood around without a truck.
 
Good going. As noted above, you'll be able to fit more wood in that bed than its rated carrying capacity, so be careful when you fill it. Just keep an eye on the springs and tires and make sure you've got enough air in the back tires at all times. Its a half ton truck, alot more capacity than a Toyota 4 cylinder, but iots a light duty pickup and can be overloaded surprisingly easily.
 
Thanks for the advice but as you can see my crew inspects each truckload thoroughly.
 

Attachments

  • IMG_1912.jpg
    IMG_1912.jpg
    65.1 KB · Views: 295
  • IMG_1911.jpg
    IMG_1911.jpg
    69.7 KB · Views: 290
schwaggly said:
Thanks for the advice but as you can see my crew inspects each truckload thoroughly.

Very cute . . .

. . . so they inspect the wood, but have you trained them to drive your truck, ATV, etc. like Loon has with Murphy and Emma? ;)
 
firefighterjake said:
schwaggly said:
Thanks for the advice but as you can see my crew inspects each truckload thoroughly.

Very cute . . .

. . . so they inspect the wood, but have you trained them to drive your truck, ATV, etc. like Loon has with Murphy and Emma? ;)

They wouldn't be able to see over the steering wheel or reach the pedals!
 
zzr7ky said:
Bravo!

I put a set of Timbren rubber springs on my '08 extended cab. I don't haul far, or fast, but there's no need to tempt the local officials into getting me on their portable scales. Mine handles well loaded or not.

EnjoY!
I love the timbrens on mine. Makes it pretty easy to overload. Found that out the other day when I was at Menards getting pavers. I filled up what I figured would be a good load, then looked underneath to see the compression of the timbrens. I say to the garden guy, nah, I bet we can get just a few more in there. He looks underneath and at the tires and says, yeah, lets throw the rest of the 6x6 pavers on your order in this load. Well, a quick jaunt to the highway and the sidewalls have me squirley all over the lane. back it off to 45mph for the rest of the trip home and hope I don't have a blow-out. When I got home I did the math on the load (menards "projects" printouts tell you the total weight) and realized that I had 2400lbs on there.

Don't be that stupid. I was lucky to not blow a tire (I need new ones anyway, but that's dangerous).
 
Status
Not open for further replies.