Here comes the sun...

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

begreen

Mooderator
Staff member
Nov 18, 2005
104,430
South Puget Sound, WA
Well, I can be an optimist, can't I? We're making good progress here and hope to be online in a week or so. The 4x4 panels are made in WA by Silicon Energy. They mount an Aurora inverter on a panel board with switches so that it qualifies also as a made in WA system. This puts us in the WA top tier for annual energy credits at 54 cents/KWh produced + 10 cents/KWh net metering = $.64/KWh. This is a 3KW array, but we are wiring it for expansion if there is a technology leap in photovoltaics in the next few years.

http://www.silicon-energy.com/
 

Attachments

  • IMG_0696web.jpg
    IMG_0696web.jpg
    118.4 KB · Views: 466
  • IMG_0699web.jpg
    IMG_0699web.jpg
    94 KB · Views: 484
  • IMG_0700web.jpg
    IMG_0700web.jpg
    64.1 KB · Views: 467
  • IMG_0701web.jpg
    IMG_0701web.jpg
    84.5 KB · Views: 469
  • IMG_0702web.jpg
    IMG_0702web.jpg
    106.1 KB · Views: 485
  • IMG_0708web.jpg
    IMG_0708web.jpg
    65.2 KB · Views: 492
How long do you figure it'll take for you to fully amortize the initial capital expenditure? Rick
 
I would love to have that sitting at the end of my drain field aimed South.
 
fossil said:
How long do you figure it'll take for you to fully amortize the initial capital expenditure? Rick

10.5 years. The way I look at it, it's a 10 yr cd at 8% interest. After that, it's all gravy. It's the best guaranteed investment rate I've come across in awhile. That's outside of the intrinsic enjoyment. It's so cool to have the house powered by the sun in summer. I've wanted to do this for years, but had to wait for made in WA products and the legislated incentives to be settled.
 
BrotherBart said:
I would love to have that sitting at the end of my drain field aimed South.

The folks that put this in did exactly that for a retired Boeing engineer that lives a few miles away.
 
Nice! Looks like no shading problems there.
 
Nice looking installation. We share your optimism!
 

Attachments

  • july 2010 065.jpg
    july 2010 065.jpg
    219.2 KB · Views: 399
Awesome. That's a tower of power!
 
Be Green

Well done!!

That is great.

One hour of solar energy bathes the earth with all the energy the human race uses in one year.

Here is a pic of my DHW Solar Heater: Hoping to turn off oil burner every Spring Fall Winter
 

Attachments

  • solar hot water.jpg
    solar hot water.jpg
    71 KB · Views: 357
Sorry meant spring fall SUMMER not winter!!!
If I get a BLAZE KING maybe I can turn it off in the winter too.
;)
 
Excellent. We are thinking of solar hot water too if I can figure out how to retro-plumb it into the house without making it too noticeable. How did you make the runs to the hot water tank?
 
Be Green

Through roof and attic, into guest room closet, then closet just behind front door, then down into basement, turns the corner and home free...
Another option would have gone down the R hand side near all the telephone and electric wires but in cold winter they told me this would have
decreased efficiency. Plus my better half did not like the idea of pipes draping down the side.

Tom
 
I made a short video of the installation over the weekend. Tomorrow we redo the service in prep for the grid tie-in.

 
Hi BeGreen, how much did your system cost? just trying to work out your 10.5 year payback. I have a 4.56kw system, it cost me $12,500 and should be paid of in 4 years. We export 80% of the power at 47cents/kw.
 
Yes, very different economics here. These are premium panels and cost more. I could have saved a lot going with Sanyo or Sharps, but then I would not get the made in WA rebate. That would have dropped my grid-tie return to 15 cents/KWh. Same with the inverter panel system. And I was not comfortable with plastic backed panels or exposed wiring. I need rodent-proof in this location.
 
Production meter installed, we be grid-tied. Here's our first kilowatt!
 

Attachments

  • IMG_0765_web.jpg
    IMG_0765_web.jpg
    45.2 KB · Views: 284
Not that I know of. If I want accrued data I have plug a laptop into the inverter and download it. There is a remote wireless option for the inverter, but it was pricey.
 
Nice. That's pretty respectable winter output.
 
Status
Not open for further replies.