Compressed Wood Logs - Anyone have an Update?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
I can't speak from personal experience, but my sister uses them exclusively.

She lives near Seattle, so not super cold there. She has a Lopi Answer insert.

She likes them, and seems to have very few issues with chimney cleaning. They don't seem to do an overnight burn.
She was here last week and commented on the logzilla's that I was tossing around out in the yard and how much nicer the fire looked during the burn.

I know this is all subjective comments at best, but it's all I have to offer and since no one else responded....
 
Flue Bug said:
A few things to consider when you burn those compressed wood logs. The binder that holds those thing together is either parrafin wax or some kind of petroleum product. Guess where that binder travels to and sticks - as it contributes to the creosote buildup in your system? And the heat is so intense from those logs, that the manufacturers suggest that you only burn them one at a time! How, much heating time can you expect from one log? Three hours? The log is so dense, that when it burns, it warps the inner baffles, side walls and plates and leaves an oily residuse that is unsightly and difficult to remove. And they're not cheap.... when you consider the BTU's needed to equate to the same amounts in both kinds of fuel.

The Compressed logs we are discussing here ARE NOT wax logs (wax logs can not be burned in a stove). The only binder in the logs we are discussing is WOOD (with heat and pressure applied during manufacture).

Burning all-wood compressed logs will greatly reduce the amount of creosote produced because they are so low in moisture.
 
Status
Not open for further replies.