I've heard of "coal bang" but Wood bang?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
T

tang

New Member
Nov 26, 2005
8
Let me first say,I have a Harman tlc-2000 wood\coal stove. I had the strangest thing happen last night while loading with wood for the night.. I had a solid bed or coals going [all wood, not coal], and loaded it up with splits of oak for an overnight burn. I had the ash pan door open and wood air contols open to get the fire cranking before closing the dampers down. The coals were not igniting the wood, it was strange, it just kept smoking; about a minute of this and then a loud WOOSH!! it ignites all at once. Scared the crap out of me..a huge puff of ash shot out the ash door[which was open].
I've heard of this happending with coal, when all the coal gases ignite all at once; Has anyone experieced this with wood? I never have, it was very strange..
 
Sure. Why do you think I don't have any eyebrows? That's one more reason to screw your stovepipe sections together.

An air-starved fire produces wood gas that hangs around until it gets enough oxygen to ignite. Usually that's when you have clogged grates and you open the door. The gas rushes out, the air rushes in and where they meet, wooooossssshhhhhh--usually right in your face. Another way of looking at it is that it's the miracle of wood gasification without the benefit of containment.

If you clean out the grates before opening the fuel loading door, it won't happen. If that's not possible, try just cracking the fuel loading door for awhile. Then once you're in there, clean the grates.
 
tang said:
Let me first say,I have a Harman tlc-2000 woodcoal stove. I had the strangest thing happen last night while loading with wood for the night.. I had a solid bed or coals going [all wood, not coal], and loaded it up with splits of oak for an overnight burn. I had the ash pan door open and wood air contols open to get the fire cranking before closing the dampers down. The coals were not igniting the wood, it was strange, it just kept smoking; about a minute of this and then a loud WOOSH!! it ignites all at once. Scared the crap out of me..a huge puff of ash shot out the ash door[which was open].
I've heard of this happending with coal, when all the coal gases ignite all at once; Has anyone experieced this with wood? I never have, it was very strange..
Click to expand...

OH, yes, this is quite normal.....some stoves even excel at it, but it is mostly operator error. It has been the cause of lawsuits, etc. but I don't know what came of them.

Word of warning...don't put your face near the door as you open it so you can "peek" inside.

This is known as a "wood gas explosion", and is as Eric says the ignition of the combustibles due to the air that you provide when you open the door...or, in some other way. It is somewhat related to the "puff puff" syndrome, where a stove puffs and puffs like a train as it searches for air, gets it, and then searches again!

In general, proper care and operation will reduce this to a minimum.
 
Eric Johnson said:
Another way of looking at it is that it's the miracle of wood gasification without the benefit of containment.
Click to expand...

Oh man, did I just get coffee through the nose on that one! :) ROTFLMFAO! Nice... very nice!

Anyways... Step 1, open air intake... wait. Step 2, Crack door open... wait. Step 3, Open door.

Like Eric inferred... when you have a smolderer... and you introduce all that air at once, you get a nice rush. Have your wife do it and you can save a few bucks on her having her eyebrows tweezed.

-- Mike
 
If I happen to have the thing really drafting with a new load, I always lift the top load door every 5-10 min or so until it ignites. I don't know that I would have expected it with the wood either.
 
interesting. thanks for all the replies..I've just never had this happen with a wood stove..it was actually funny..it scared the sh*t out of my dog who was sleeping in front of the stove...
 
same thing happened to me last year. i kneel down at my stove to load it. so i got down and thru in some cut offs from the hard wood floor guy nice dry oak. anyway i thru in too many pieces, it was smoking so i went to throw in a match and when i opened the door whoosh right in the face.
no burns just adrenalin
 
I had a TLC-2000 for 3 years. Overall, good stove.

But we would get flashbacks often with anthrite. I also would burn some shelled corn in the TLC, and that would flashback too.

Trial and error. I could tell when a flashback was coming. Too much dense smoke in the firebox, then "WHAMM".

Worst thing was all the coal soot that got all over the house each time we had a flashback. No fun. Wife HATED it when I flashed the stove.

Ussually my mistake. Getting impatient and loading in too much coal or corn on a refueling.

DK
orintheseaboveinstances,thewifewouldcallmed-or-k
 
Status
Not open for further replies.

Similar threads

Caw
First World Problems - Too Hot!
Replies
11
Views
1K
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
S
Napoleon 1402 Insert Newbie
Replies
21
Views
629
Napoleon
dafattkidd
dafattkidd
weee123
Coal bed size on reload
Replies
29
Views
4K
The Hearth Room - Wood Stoves and Fireplaces
Woodsplitter67
Woodsplitter67
N
It's like a new stove
Replies
15
Views
2K
Vermont Castings
NewGuy132
N
F
Please help, newbie with F400 - Awful Efficiency Issues!
Replies
17
Views
770
Jotul
D. Hermit
D. Hermit
Top Bottom
Back