Dolmar 7300 or husky 372xp

2 excellent choices. I would say whichever dealer is better and which one feels best to you.

I really liked my 7300 and it is an excellent saw.

I have the 2171 instead of the 372 and it is really nice, too.

To me, the 7300 is a little more ballsy and the 372/2171 is a little more nimble.

You can't go wrong with either choice.

7900 unless there is much price difference. Or, get the 6400 from Baileys and upgrade later.
it is a little pudgy at 64 cc, lots of good saws there, but with the same weight and 79 cc.....

seems odd such a price difference from 64 to 79, stihl does the same thing with the 290 310-390 series.
other than economies of volume made, there is no difference in components cost.
Marketing....

but any of the choices you have are great.

k

Can you find a 7300? My dolmar dealer told me back in February that they were no longer in production.....

I looked at the Dolmar saws. I understand they are a quality German product that runs very well. We have basically no dealer support hear. On the other hand, the 372 XP is one of the most successful saws of all time. I suspect that is for a good reason, specifically, it's the right balance of power weight speed etc. I suspect parts availability in 20 years will be superior for the 372, and there is local dealer support, so I got the 372. It is very satisfying saw to run because of it's speed and power.

At the time a Stihl 440 was also on the shopping list. If I was buying a new/used 70cc class saw tomorrow, I would strongly consider a 440/441 as well. It is supposed to be another wonderful work horse. Good luck.

Either one will be great (although I'd skip the 7300 and consider the 7900).

Do you have a local dealer for both brands? If not, go with the brand that has a local dealer...otherwise toss a coin.

I really like my 7900, but my dealer support is marginal at best. They are 'local' but really only a 'satellite' store. The main shop is 30 minutes away. The local place stocks NOTHING. I wish I knew a little more then. If I had to do it again, I'd buy a Husky from a really good dealer 15 minutes from home.

In short, they're both proven saws. Go with the dealer you're most comfortable with.

I do not value the presence of a local dealer in this day and age. Welcome to the internet age, you can buy anything and have it shipped cheaper than that local dealer who also has to cover his overhead.

I've bought saws, guns, and motorcycles locally and never needed to go back to the dealership. More important is a good small engine repair shop just in case you run into a repair that is too difficult.

Oh and for me, I vote the Dolmar. I've never liked Husky saws, they should have stuck with sewing machines and motorcycles.

Highbeam said:

I do not value the presence of a local dealer in this day and age. Welcome to the internet age, you can buy anything and have it shipped cheaper than that local dealer who also has to cover his overhead.

I've bought saws, guns, and motorcycles locally and never needed to go back to the dealership. More important is a good small engine repair shop just in case you run into a repair that is too difficult.

Oh and for me, I vote the Dolmar. I've never liked Husky saws, they should have stuck with sewing machines and motorcycles.

Click to expand...

Would you care to enlighten us less informed on such an inflammatory statement?

KodiakII said:

Highbeam said:

I do not value the presence of a local dealer in this day and age. Welcome to the internet age, you can buy anything and have it shipped cheaper than that local dealer who also has to cover his overhead.

I've bought saws, guns, and motorcycles locally and never needed to go back to the dealership. More important is a good small engine repair shop just in case you run into a repair that is too difficult.

Oh and for me, I vote the Dolmar. I've never liked Husky saws, they should have stuck with sewing machines and motorcycles.

Click to expand...

Would you care to enlighten us less informed on such an inflammatory statement?

Click to expand...

I'd be interested also......not heard of anyone, regardless of their saw loyalty that has run a 372XP or other Pro models and determined Husqvarna should not be making saws.

Highbeam said:

I do not value the presence of a local dealer in this day and age. Welcome to the internet age, you can buy anything and have it shipped cheaper than that local dealer who also has to cover his overhead.

I've bought saws, guns, and motorcycles locally and never needed to go back to the dealership. More important is a good small engine repair shop just in case you run into a repair that is too difficult.

Oh and for me, I vote the Dolmar. I've never liked Husky saws, they should have stuck with sewing machines and motorcycles.

Click to expand...

I own both Husky and Stihl saws and have used Dolmars on several occasions. In their pro lineup the majority of Husky's saws are fantastic.

The 372 IMO has better balance and handles better than a MS440 but that's personal preference more than anything as I own both. Most of the time my MS440 has a 28-inch bar for big wood these days and the 372/346 spend the most time sawing.

The answer is orange. 372XP .

KodiakII said:

Would you care to enlighten us less informed on such an inflammatory statement?

Click to expand...

I believe he just felt the need to stir the pot.

Nobody in any seriousness can not admit the 372 is a great saw, now matter how thick their creamsicle goggles are. :bug:

wendell said:

KodiakII said:

Would you care to enlighten us less informed on such an inflammatory statement?

Click to expand...

I believe he just felt the need to stir the pot.

Nobody in any seriousness can not admit the 372 is a great saw, now matter how thick their creamsicle goggles are. :bug:

Click to expand...

lol Agree!

wendell said:

KodiakII said:

Would you care to enlighten us less informed on such an inflammatory statement?

Click to expand...

I believe he just felt the need to stir the pot.

Nobody in any seriousness can not admit the 372 is a great saw, now matter how thick their creamsicle goggles are. :bug:

Click to expand...

Whenever the need arises for me to get a new 'smaller' saw,either the 372XP or its predecessor the 272XP is what I'm looking at.

You folks are right I was just poking fun with a very obviously sarcastic statement. Husky has been and will continue to be a huge force in the market. Get your undies unbunched, geez. Oh and for those of you who don't realize it, you don't actually have to check your undies for bunches.

A single experience with an unfixable husky in my childhood is all it takes for me to not consider the husky first. Like a ford, chevy, or dodge, all are very good these days or they wouldn't be around.

Highbeam said:

You folks are right I was just poking fun with a very obviously sarcastic statement. Husky has been and will continue to be a huge force in the market. Get your undies unbunched, geez. Oh and for those of you who don't realize it, you don't actually have to check your undies for bunches.

A single experience with an unfixable husky in my childhood is all it takes for me to not consider the husky first. Like a ford, chevy, or dodge, all are very good these days or they wouldn't be around.

Click to expand...

Some people use "smileys" when they are intentionally poking fun at others and their brand loyalty. If unused, or your statement is unexplained opinions can be deemed unmitigated.

Waah, I don't use smilies and you can't make up new international internet rules. You'll have to use your noggin' and assume the best. When you read newspapers, do you see smilies?

Highbeam said:

Waah, I don't use smilies and you can't make up new international internet rules. You'll have to use your noggin' and assume the best. When you read newspapers, do you see smilies?

Click to expand...

No offense intended here as I have no dog in the fight and don't give a rip what anyone thinks about my saw but it sure didn't seem like sarcasm and I definitely didn't get that you were joking until I read the post stating that you were.

Back to the original posters question I have never run a Dolmar but have used my friends 372xp on occasion and it's on my short list for when I am ready for a new saw for sure.

KodiakII said:

Highbeam said:

You folks are right I was just poking fun with a very obviously sarcastic statement. Husky has been and will continue to be a huge force in the market. Get your undies unbunched, geez. Oh and for those of you who don't realize it, you don't actually have to check your undies for bunches.

A single experience with an unfixable husky in my childhood is all it takes for me to not consider the husky first. Like a ford, chevy, or dodge, all are very good these days or they wouldn't be around.

Click to expand...

Some people use "smileys" when they are intentionally poking fun at others and their brand loyalty. If unused, or your statement is unexplained opinions can be deemed unmitigated.

Click to expand...

The HORROR!

Highbeam said:

Waah, I don't use smilies and you can't make up new international internet rules. You'll have to use your noggin' and assume the best. When you read newspapers, do you see smilies?

Click to expand...

Not trying to make up new international internet rules, but most sites do have rules for trolling. Brand loyalties run deep in everything from heavy equipment to cars. I myself don't give a shidt, but if there is a problem with a particular product it would be nice to know about it. If you throw a statement out there and don't add anything to it...well just use your noggin. Apologies to the op for jacking this thread.

Highbeam said:

You folks are right I was just poking fun with a very obviously sarcastic statement. Husky has been and will continue to be a huge force in the market. Get your undies unbunched, geez. Oh and for those of you who don't realize it, you don't actually have to check your undies for bunches.

A single experience with an unfixable husky in my childhood is all it takes for me to not consider the husky first. Like a ford, chevy, or dodge, all are very good these days or they wouldn't be around.

Click to expand...

Same reason I haven't considered Ford in new car purchases for the last 10 years. I had a bad experience with a lemon of a focus. It only takes once to sour you on a brand especially if the mfr doesn't step up.

That being said any of the three majors Husky, Stihl, Dolmar are good choices.

Takes years to earn a customer.

Minutes to lose one.

I have a 359 thats a great saw. It does have a bad PTO side crank seal. I love Husky saws, they sure had sealing problems though on the hot running emission saws. The 359 takes a little bit to come back to idle & will run fast on its own at times. I'm at sea level here & the limiters were never put on right to adjust for this level. Lets just say this is no longer a problem. Husky saws have really taken it on the chin here, any air leaks & the piston is history, Randy