hi all.gave the stove a good cleaning,motors removed and lubed and new gasket on comb blower.pipes all brushed and fired up the leaf blower.she's clean as a whistle and all ready for another season.sittin on 4 ton.3 ton green team and another ton of smoagisgborg.
i am looking for help on picking up a magna gauge.my enviro manual recommends a setting of 0.10 inches.everyone i talk to seems to think this number is awful low and the way the stove burns on this setting reflects that.i found it burns so much better if set to 0.14.
i want to buy one on ebay so i dont have to keep borrowing one but could use help on which one to get.does it matter if i get 0-0.50 or 0-1.0
last year i had some issues with the stove and it turnd out that my ash pan was warped.that has since been rectified.i also got a high ash liner for the burn pot.with these two changes to the stove i'm guessing the draft setting will change.i know you can do it visually also but would like to do it with the gauge.thanks in advance,Corkman.
i am looking for help on picking up a magna gauge.my enviro manual recommends a setting of 0.10 inches.everyone i talk to seems to think this number is awful low and the way the stove burns on this setting reflects that.i found it burns so much better if set to 0.14.
i want to buy one on ebay so i dont have to keep borrowing one but could use help on which one to get.does it matter if i get 0-0.50 or 0-1.0
last year i had some issues with the stove and it turnd out that my ash pan was warped.that has since been rectified.i also got a high ash liner for the burn pot.with these two changes to the stove i'm guessing the draft setting will change.i know you can do it visually also but would like to do it with the gauge.thanks in advance,Corkman.