ticking noise heard - kind of annoying

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

csierotnik

New Member
Dec 10, 2010
39
Syracuse, NY
Hey all,
I had the stove running tonight and I noticed a ticking noise heard - guessing it is coming from ss rigid pipe coming out of collar. I have a Lopi answer a-2 insert installed in my fire place. I have a straight ss pipe coming out of collar connected to a ss 30 degree elbow that goes into a ss inulated liner. I had the stove at 400 and flue temps at 190-220. Any ideas what is causing this noise. Is it just the SS heating up?
 
Both my old steel insert and my current 30-NC started/start ticking at four hundred degrees. Great way to tell me it is time to start turning down the primary air.

Stoves tick. That is what they do. Metal does not expand quietly.
 
How long is the ticking noise happening? It could just be normal metal expansion from the stove heating/cooling. Or, there could be a loose part on your air intake that may be flapping/ticking.
 
If it's a rhythmic ticking it may be normal. If it is more of a quiet crackling sound in the flue pipe, it can be creosote burning off.
 
csierotnik said:
Thanks for the quick reply guys. It is definately more rhythmic. I ll take that as my sign to start shutting down the primary air.
Thanks again!
Maybe, that is just where BB's starts ticking. Yours may be different. As others have said thought, metal expands, it makes noise.
 
tfdchief said:
csierotnik said:
Thanks for the quick reply guys. It is definately more rhythmic. I ll take that as my sign to start shutting down the primary air.
Thanks again!
Maybe, that is just where BB's starts ticking. Yours may be different. As others have said thought, metal expands, it makes noise.

That Buck doesn't tick Chief. It is groaning. From old age. :coolsmirk:
 
My T5 is always making noise. It can be annoying at times, but then I think about all the free heat that I'm getting out of it and for some reason the sound just disappears.
 
The chase for my chimney runs through the bedroom so the ticking from the liner cooling lets me know it's time to reload

The sound is not loud enough to be annoying or wake you but enough to get your attention

Aaron
 
Don't cut the red wire!!!!! ;) :)


----------

The sound you hear is the sound of cheap heat . . . embrace the "noise."
 
firefighterjake said:
Don't cut the red wire!!!!! ;) :)


It's a ticking bomb!
-i143.photobucket.com-albums-r127-vettefred-stickman.gif



Actually it's a great feature to have an audible identifier to the rapid (or not so rapid) temp changes, I'd invest in a magnetic thermometer. This way you'll "see" the ticking.
 
On my Answer, a slow ticking sound (tick.................................tick...................................tick) means it is slowly heating up on cold-start or warm re-load. If I turn the primary air down too quickly, I'll get a fast tick as it cools down (tick.tick.tick.tick.tick..etc.). You'll soon be able to tell the difference between the two and know whether you should give it more primary air or whether to watch it for overheating and be ready to turn the air down.
 
Status
Not open for further replies.