I've been lurking a bit and decided it was about time to ask for help and introduce myself. I'm in Western Washington State down around the south end of the Hood Canal. Anyway I have a Breckwell 24I. It was new in January of 1997. I've used the stove since I bought the place ten years ago. For the most part the stove has performed flawlessly for those ten years. Now it seems the auger is not feeding pellets at an even/steady rate. I use the manual feed button to prime the auger and after 90 seconds there are just one or two pellets that drop. I've got the thing apart so I can see the auger is turning and stirring the pellets. I had the thing burning yesterday for about four hours with the feed rate on the highest setting. It seemed like it was producing a fire with a lower feed rate setting. At some point during the night the fire must have gone out and pellets continued to feed. I've now got a burn pot over flowing with unburned pellets and probably a jammed auger. This has happened once before. Any way . . . any thoughts on what may be causing the irregular feeding of pellets?