Bad week as an inspector

First I condem one chimney for lacking code requirement of flue separation
Second the state is going to pull the rug out from under me and take away my certification
I loose my election bid for board of health. Only good thing is it hit every fairway tonight averaging 260 yds plus.. If only i could putt better, but not bad second time out 3 over par

Now comes this chimney situation

While I am still an inspector, I have discovered these code deficiencies recently. The said home being build contains 6,700 sq ft, so not the cheapy cape from yesteryear. The inspection is a throat inspection of a fireplace. Sitting on the ground is a pallet of cored masonry 4” blocks. Wondering what they could be used for I soon discovered they were used to form the backing of the firebox and even the spacing to the wood header.
Code requires solid masonry. Not hollow core The guy doing laying the bricks and blocks does not understand English. It is impossible to have a conversation with him.
I asked him For the masonry license required for chimney construction. He no speak English and continues laying hollow blocks I tell him to stop but he continues Finally one of the framers gets his boss on the cell phone. This guy ask me what my problem is he informs he has done thousands of chimneys this way and never had a problem. I tell him there is a problem and I stopped the job for two reasons hollow core blocks and it being done by an unlicensed worker. He informs me I can’t stop the job he has to pay a crew and is on a schedule. I require him to come to the office and present a copy of his masonry license to be copied and placed on file He can’t comply, as he does not have a masonry license. I said what?. He says no one ever asked for one before and did not even know they exist. The law or code requirement was initiated in 1988 He request me to inspect today and that he changed the hollow core blocks with solids This guy must think I fell off the turnip cart as I can tell fresh masonry and older established motar a few days old the top blocks were changed but none of the bottom. Since there were no solid blocks and I had stopped the job then how can he explain additional work or them being solid?
Here is where this is going tomorrow I am bringing a hammer drill and masonry bit and drill the suspected blocks. If I hit hollow masonry the whole chimney is coming down and installed by a licensed mason. Required is a codebook on the job site, there is none. I will not sign off on a sub standard fireplace non-code compliant.
Wondering out loud here, If the state removes me who will replace me? .I wonder how many substandard un safe chimneys are being build every day. Who will stand up for correct practices Craig knows the dangers of substituting hollow core blocks for solid masonry. Life and safety issues should never be compromised. I will be on the phone with the General Contractor first thing tomorrow. I am going to draw the line in the sand. If I have to I will shut down the entire job including police to evict all workers. I am not doing my job if I allow or compromise safety and code. I should be removed

Up date just as I suspected no licenced supervisor again on the job to oversee the chimney fire box construction
My hammer drill also proved my point hollow core blocks as close to combustiables as 1.5" The guy lied to me yesterday telling me he swapped out the hollow core block with solids. I knew he was lying as I can tell the color of 3 day old motar to fresh laid motar.
The drill told the entire story left no doubt. Job is shut down till a meeting with my commissioner and the GC and owner of the masonry company. This guy went ahead and built the entire chimney with hollow core blocks. Some angry words from him towards me on the cell phone. He is going to report me to the state. I thanked him for doing so. I also reminded him the state would be real interested in those 1000's other chimnies he built with hollow core blocks. So Tuesday morning, Monday being a holiday, we will meet. The local district state inspector says he may attend ( golfing buddy of mine)

This setup is know in the industry as a burner. Get this, the cost difference between hollow core and solid block is $.35 ea 300 used in a chimney $105 this guy is staking his reputation to save $105. The home may approach 3 mill. I find out he is paying his foreign no speaka English help $8 per hour working un supervised. He could not meet me at the job It requires a ferry ride to get to the main land Matha's Vinyard from his summer home. The greif and insults I get trying to do my job right,,may not be worth it, definitely not worth the money or agrivation. There is something wrong with this picture. I get Paid $25 to uphold the code and protect one's life and safety on a 3 mill home? And BTW I drive my own vechicle to do the inspections? And the State wants to de commission me?
Sounds about right and fair? My wife is right. I should stick with carpentry less headaches twice the money. Speaking of which lunch hour is over

Braintree is about 20 minutes away Used to be closer with my LT1 vette But driving a 4 banger with little power but econimical
Should have given me a call.

BTW are you bring coal up to Branton point new Coal fire electric plant? BTW the cleannest burning of its type so far

John the letter looks good Can't meet tomorrow night got to have some fun sometime Golf.

Craig the hollow core block was part of the problem Unsupervised work by people 3 months in the country building the fire box is another issue and using hollow core backup blocks and filling the sides within one inch to combustiables another

Solution after the meeting he brought in another inspector from Revere but in the end it was my call.
The two fireplaces and chimneys will be inspected and certified by a requstered engineer. The owner, (Custom home), will be informed in writting
being made aware of the situation. The hollow core blocks near the combustiables that I drilled will be removed.

The second chimney on another home after trying to fudge it again is comming down. I have never seen where both flues makea 45 degree bend for no reason very poorly built Accident waiting to happen. Too many code violations to mention

Hold a day or two on the letter I have more than 20 here now.

In 10 years 3 chimnies were made to be torn down, the past week 2 more. I one thing in common all involved first time masons doing work in the town. Most of the regulars do a decent job. This does not bode well for work being done in the rest of the state. What is scary is poorly built chimnies and fire places could be the norm.