Separate names with a comma.
Yes that does look perfect there.
As a former leyden owner, also wanted to warn you away from the leyden. Very difficult stove.
Switched it for a Jotul and have never been happier.
Just wanted to send out a BIG THANK YOU to all at Hearth.com for patiently walking me through trying to get my original Lopi Leyden to work, and...
I just had the new stove hooked up to my liner, and this is what he left me with.
I've decided to insulate the liner this summer, and will be...
ok, I trust you,
but why why why then did my installer just do this to me.
just used done right
very good to work with
Nashua 324A Aluminum Tape
Is this the correct tape to seal the liner to the stove pipe?
Made an appointment with a sweep for this weekend.
He told us "I don't sweep from the top, it's too dangerous. I only sweep from the bottom"
I called the dealer, asked for a different installer. He said all his installers use fiberglass, no problem.
I called a different...
Just had the installer here to measure.
He states his intention is to install fiberglass insulation in the masonry chimney. He told me rock wool...
My lid was cast with a slight warp, and leaked air.
Another user on this site also had a warped lid, ordered a new lid, and it was also warped....
I was looking at the T Pipe connectors at Woodland direct.
Do you know if the dimensions/sizes of available standard T pipe connectors will make...
Will be installing Jotul Castine.
Into existing fireplace, exterior masonry chimney, with existing full liner, uninsulated.
Liner length is 30 to...
thanks for sharing
Is it the wood stove?
Or is it the cold?
Cold in the AM. cold in-between loads.
My family doesn't care where the heat comes from, just as...
I'm going to try again with the new dealer who is taking over the store.
My dealer sold me a floor model Leyden with a warped lid, despite paying for a new one, and then he promptly went out of business. I want a new...
I've been agonizing over the same question, castine v oslo. I think I'm going castine as an area heater for first floor for similar reasons....
That's the situation I find myself in now. I've split all the easy stuff. Now I'm after all the garbage.
About an hour with the sledge and...
I would absolutely pay 130 per cord to keep or stay ahead. I find it costs WAY more than that around here. This nursery wouldn't happen to be in...
You don't have to buy log length or pre-split.
You can often buy a truck load of rounds already cut to 18" or so. All you have to do is split them.
I hand spilt 30 to 60 minutes a day. Its exercise. And it's productive. But I don't mind taking my time with it.
So I passed. I knew it was smaller than I wanted, but thought it was a good deal for a F3CB.
Since its not a F3CB, now it seems over priced. I...
Want to be prepared before I meet...
That stack is a thing of beauty. Admiring them never gets old.
I have almost all uglies. I scrounge leftovers. A half dozen wedges and a...
I'm looking at past threads on the stove, and it seems to be the older model.
No ash pan?
Not as efficient?
More concerning to me, is it NOT...
Agreed not very powerful. Meant for those small European homes.
Not my style, but I can appreciate a well designed stove.
This sounds like it fits:
Looking at a Jotul 3TD tomorrow.
How is this different from a F3 CB?
Anything I need to know?