Separate names with a comma.
I tried adjusting early on and ended up back at 13%
Havent looked at it much since.
Two years dry spruce and birch mix
Pretty good performance
Busy weekend here
I saw 285 smoke temp
This morning; i havent cleaned for about 6 days. I do see it reduce after cleaning.
Effecta 60kw in Alaska
From another Effecta owner I say I am very happy with mine and rhe service even from Sweden if need be.
I have been running mine 3 winters i think...
Im looking forward to see if I can get such reprots from the wife
we are good for something once in awhile
I am looking forward to switching from pellets to wood and compare notes
Found it, and yes tank replacement would be a expensive process.
I Have looked and cant locate some interior pics I had. The House was built around this massice cylinder tank and closet doors allow access...
I will be starting my conversion next weekend. Have a banquet we are running this weekend.
I will post my progress and yes with...
Back at it Monday, sorry.
Will do; i have 12ft and may add one more section to extend. This will come with the additin of the new boiler room and the move of my equipment...
I get it
Little slow sometimes
The co2 percent comes in with the wood mode and the lambda sensor technology for the gasification process.
i only use to to verify the efficency...
I use the same make but its the 2000 watt, i run my boiler in pellet mode as well as pump with no problems 8 hours.
Didnt think about them being...
Yes I only use the 250 in pellet mode and the 1250 in wood mode. My pellet burner is 30 or 35kw, it runs to the the buffer tank or tanks via my...
So i have been studying this this afternoon after installing the Tigex draft stabilizer.
The top of my buffer tank is about 165 and my return...
The pictures says it all!!!!
I bought this house about 10 years go and struggled through the first bit, oil boiler that is under sized and the...
I have seen negative 82 outside in a packers tent for 12 days. Much younger then and not so brite*****
I was struggling to fully understand how this was all gonna work but was willing give it a go as Effecta tells me this how they do it and Johndolz...
Good evening all
Been a bit busy here, welding an adapter for my Tigex draft enducer. Finished it tonight, just waiting on some high heat paint...
Of course this is for the 21-100 and are 1 1/2"
Im sure there is a 1 1/4" version for the 21-60
Watts GB-E gasket kit for dieletric unions
Been in operation for two years now
I have used 1" shark bites for 8 years now since installed, about 20 fittings in all
No issues what so ever
Heat all winter in Alaska
Glad to be in the interior of Alaska; two 1000 gallon tanks on craigslist for a great price, loaded both on flat bed, 3 straps and on the road....
Charger is a IOTA
DLS-45, Series M
With the IQ4 Smart charger attachment
Oh yeah power came back on
Made national news:)
I will when i get home
I know the inverter is a xantrex 2000w
230v 50hz out
2-deep cycle 12v batteries
The only thing i cant remeber is...
So we lost power yesterday afternoon while I was at work; returned home to find my Effecta boiler performing nicley on battery back up. Amazingly...