Separate names with a comma.
In addition to what others have posted for a manual.
Enviro has put their Pellet Service Manual on line as well.
Its more of a technicians tech...
Dealer coming.....That's up to you. What do they charge for a home visit?
If you do have them do it....watch over their shoulder and learn....
Did I hear my name????? Lol
Easy as pie to remove the convection blower.
Top of Stove....
Open up small Fill door and remove the two Hinge...
Check the fuse?
It on the circuit board behind the panel on the right side of the stove (if u are facing it)
Congrats. Good repair. ;)
Now have a beverage of your choice and enjoy the heat.
Had the Auger motor out of my Enviro EF-2 once.
Don't remember it being a particularly hard job.
Don't remember the details but was not a big...
If you like Vermonts try giving June a call at J&S in Berkely, Ma
Happy Customer for years....
yep. You might be able to find a match at Grainger.com or one of the surplus places.
I use a painters 5-in-1 tool for scraping the burnpot liner.
Available at any hardware store.
I use a homemade vacuum hose reducer setup. I use...
I've never had to change my glass gaskets. On either Enviro stove I have.
If you are refering to your Door/Ashpan gaskets then.....maybe.
7 here on Cape Cod
You are the "Da Man" Scott.....I stand corrected.
You would know better than me for sure.
Thanks for info,
As I understand the rule........
Your vent must terminate 3' above the actual roof penetration on the high side and...
Your vent termination must...
Seems to be working fine for me now.
Was slow on Sunday, faster on Tuesday and required my login each time.
But tonight it remembered me. Speed...
If it is like my Enviro M55 Cast....You have to remove the top first.
On the Enviro it is just 2 hex bolts under the hopper fill plate.
Glad to hear.
Heat is good!
I'm on my second self install with PV-Pro.
Nothing bad to say about it.
Just my observation
Just go up a size on your screw. Not sure what the originals are #6, #8 , or #10. I'd guess about a #8.
Any hardware store will carry what you...
Hope you love yours as much as I love mine.
Welcome to the family :-)
I dump mine on top of the compost pile at the rear of the property.
Not sure what happens to them as I've never used any of the compost.
First off welcome to the forum...Lots of great info here and most are more than willing to help someone out.
On the main Hearth.com home...
No prob. Just paying it forward for all who have helped me in the past.
Oh BTW....I usually do this deep clean about every other ton in mine....
I'm a Ford guy but I'll see if I can help out. :-)
Not sure if you have a steel or cast stove so I'll keep this generic
Only a few...
I work outside and after a particularly cold wet and windy week (Southern New England) My bones were feeling chilled.
On Friday I had ordered 250+...
Like Vinny said....check the ribbon cable connection to the Daughter board. I know mine usually needs to be checked any time I take off the the...
Damp paper towel dipped in ashes will get it off.
Once cleaned off i treat my glass with Rutland "White Off" Ceramic Glass cleaner.
Get or make an adapter from metal. This is to get from your 1-1/2" stove connection to any size metal vent you want.
-Some ppl use manufacturers...
On Peters Pond.
Didn't nap (lol)
Sun came out and I went out and fired up snowblower.
Cleared mine, cross street (cut thru) and two...
I'm on Sandwich/Mashpee Line....we are getting a straight north wind. Blowing down the Lake right at me. Sucking heat out of...
also try http://www.dynamitebuys.com/