Separate names with a comma.
make sure its in the manual mode of opperation
you need to go to 4 in pipe, that distance is too much for 3 in.
the blowers are whisper quiet, trust me
and you can go to breckwells website
and in the upper right hand corner there is a link...
Cause big es are the bomb.com
i just say you go with breckwell
since both of those holes are round it might tilt a little to the left or to the right, this isnt going to be a huge issue, your stove will run...
check the auger feed times, and this just sounds like a damper issue to me, its pretty much like an art controling that damper, you kinda have to...
its not recommended to run the stove on 5 for more than 2 hours, there is a high temp thermodisc and it will shut the stove down if it gets too...
thanks for the follow up
hope that new CP works for ya
im sure you wont have any trouble tho
good way to test if you need it is run your stove and if it seems to have a dirty burn or sooting up the glass pretty quick then open a window or...
a good way to test if you need it is run your stove and if it seems to have a dirty burn or sooting up the glass pretty quick then open a window...
wow, can you say FAKE!
what mode of opperations is your stove in, on/off high/low or manual. and is your stove hooked up to a GFCI socket
you are going off what compressedwoodsupplier said
if you look i said the same thing that you said, i just miss read who that reply post was too
yes sir that includes everything on the stove
auger, combustion blower, convection blower, igniter(on start up)
depends on what auger motor you have but you have a 1 rpm
on start up it pulls 657 watts and on normal operation it pulls 358 max
based on a 110...
thanks for the followup post
if the cap to the exaust is above the window to the right by atleast one foot then you have nothing to worry about, the inside dimensions are fine...
when you have it on the high low it will blink when it cycles down to the low setting. that is there to let you know that it is on one and not 3
The only thermostats that will work with the breckwell stoves are 250 or 500 milivolt. 750 will power the stove up but it wont shut it down as the...
The only thing that shuts the blowers off is the POF thermodisc, once is gets under 90 degeres then it will shut both blowers off. seems like its...
we make 4 types of big e's, only one however come wiht an ashpan, it is also the most popular so
you do know that your not supposed to burn corn in the big e right?