Separate names with a comma.
you said a few years ago the on the model 2004 and above the bottom three work on any heat setting.. so which is it?
Its the correct augur. This stove ran great last year and before. I deep cleaned it in November. Actually I put a new room blower on it this...
Same pellets..... any way to check the augur. I just replaced it in 2014 (i believe) wasnt terribly long ago. anyway to check or bypass the timer...
I have my EF2 on 'full blast' and it doesnt seem to be dropping the right amount of pellets as in the past. The burn pot doesn't even get half...
I know it's only about half way through burning season. But with the warm weather on the east this year what does this do for next year pellet...
Any one know if there is a hopper extension for the EF2.
idk.. dont really see anything like that on my panel.
Good. So one solution solved.
As far as I can read he is just asking why the heat feels the same on different heat settings. Said nothing about trying to heat his whole house....
Did you get the stove used? If you did it may have had a thermostat hooked up in which case the jumper is missing if you are not using one. Need...
Do you have a burn indicator thermometer thing.
Do you have your oak hooked up? Those numbers are good if you have good pellets. You may have to up the air if the pellets aren't burning well....
I believe it was stated a while back that 2004 and up, the bottom three work on all settings
Same year as my stove. This stove is very picky about pellet brand. Do you have access to different brands of pellets in your area?
Still do not see any pics!
I think my store it was fel-pro though not mr. gasket
I looked at that tonight, wasn't sure if it would work.
I need 1\16" thick. which it doesn't appear they have. I have a 1\8" silicone gasket and I can't slide the motor with that into the slot.
my first stove was a kozi shop heater. hated it. no heat.
needed a new convection blower for my ef2, ordered from amazon, and didn't come with a gasket. I dont have enough of the lytherm stuff left to...
Wish they delivered to me in ny.
May insurance sends out an update request every couple years. I marked that I have pellet stoves. Hasn't been any issues.
If you don't mention...
You could atleast get them just in case. Is this your only heat?
I think you have this wrong or maybe the newer models have it but my pdvc only has hi/low when using Tstat. There is no auto.
I have a cheap Tstat on mine. What option do you have? Off/on/fan??
Did you take the jumper out of the control panel on the stove?
For my past experiences. Instant heat = instant cold. No good
Can a EF2 or englander pdvc burn a mix with pellet piping?
So I bought 6 tons of pellets from TSC, 3 are still waiting to be picked up. Of course my lowes now has the better brands. Any one ever been...
65 degrees? Cold? How hot is your house in the winter?
Is this new? I was looking for one last year and came up empty.