Separate names with a comma.
Ok, it is sad to say but Maple 1 was right, after following all the suggestions from everybody one pipe was frozen. The pipes are without...
When I open manually the valve I can hear the water running but the boiler does not start. What I mean with "the boiler does not start" is that...
I will look into the airlock or frozen pipe in the morning.
What I did so far, besides the changing of the head.
When I start to purge the system...
I'm having a problem with one of the zones in my house system.
I have replaced the T-stat and the head zone valve and the boiler (oil) is not...
It could be, I don't know I read about the time in
a trouble shouting guide.
The stove is working, what I noticed is that there are a lot more...
All running again.
The auger was stuck I have cleaned and I didn't realize
that it takes between 7 to 10 minutes to work again.
I have a Yankee Bay insert from Lopi and last night it stops feeding pellets.
I had cleaned the hopper and put a few pellets and I can see...
Just an update and one more question.
The stove still making noise)a lot) but checking and checking
I found out that the noise comes from the...
No, I didn't that is a good idea.
I will try it sometime this week if the weather gets a little warmer.
Thanks I will do that and probably I should order a new motor
for the just in case.
I have taken everything apart, cleaned and lubed
the noise still there, it is like a winning sound.
Any more ideas of how to address the problem?...
I just identified from where the noise comes from.
It is from the exhaust blower motor. I will clean it tomorrow
like Smoky the bear told me, I do...
Thank you, I will do that tomorrow morning.
Where can I find the blower motor cleaning and lubrication info?
I was thinking to lubricate the...
I have a Yankee Bay insert and today it has a noise coming from the left side.
If I turn the fan down the noise is not there any more, in high...
I can not find a cap for a 4' diameter and a plate of 13x13
Can anybody tell me where can I buy it?
I ordered from a web site and the cost was...
I was thinking to built he top plate but after what you have mentioned about liability I will try to buy one. I have got all from the people that...
Yes, I'm putting a s/s liner and I didn't know how to finish. Now after your explanation I know what I need look for. Thanks
I have attached a pic of the way I want to finish my
rain cap in my masonry chimney flue.
Will that way be ok?
I will try to find a dealer near here.
Does anybody have a pic of those clips maybe I can make it.
I lost the refractory clips of my Lopi insert.
Trying to find where to buy them on line with not results.
Can anybody tell me where?
Thank you very much for the help.
I was looking for the info since pellets are getting very expensive.
Can I burn corn in a Castile Quadra Fire?
It is like the door on the left. I do not get any smoke.
I will replace the gasket since it is frayed and I believe that is the reason why the...
JTP, it is an insert, thanks
PS: I will look for the info and I will give it to you.
Thank You JTP
Yes please and thank you
I went this morning to the store looking for the tadpole gasket( they didn't have it in stock) and in the mean time I checked a Castile insert...
I need to replace the door gasket in my Castile too, what is the size that comes in the big box that you bought?
I have a Castille Quadra Fire that it was running good for the last 10 days.
Today the insert shut down twice, it was the switch #2 the one...
Thanks BG, the exhaust pipe it is pretty much straight, I would like to install a t-vent with a clean out after I'm done cleaning. Can I get the...