Separate names with a comma.
Reminds me of something I did last season. It was getting late so I checked the hopper and knew I would need to refill in the morning
so I grabbed...
You could check the connector at the board. Make sure the solder on the pins(back of board) looks good with no cracks in the joints.
Is the power light indicator showing? It sounds like the control board has failed.
Welcome to the forum btw.
Short burns will dirty the glass quicker. It will take about a day for the glass to start getting a white haze on it when burning full on with a...
Was the fuse blown? Does the outlet have power?
It is not recommend to run a UPS from another UPS.For a safe shutdown use the modified sine UPS. A member here @TimfromMA has modified a pure...
Never. I don't have that option and way too much to install a brand new heating system. Electric would have to get much cheaper and don't see that...
Look for the mark made by the set screw on the shaft and line up the set screw as close as you can. If memory serves the fan will be about 3 to 4...
I was the same first few weeks. Had to acquire a comfort level with that new fangled wood burner. Now I don't even think about it. Keep up on the...
+1 for stove parts unlimited. Used them several times no complaints and they send me candy.
Nice looking install. Welcome to the pellet burning family. Not sure why you got a Harman though.;)
I have read stove manuals where the air intake is adjustable. They say to adjust the draft to where embers will dance in the burn pot instead of...
Care full with the switch cleaner. If the rheostat is not the wire wound type it may make it worse or destroy it.
Is it possible the high limit snap disk is used to control high temp or is it used just for over-fire protection.
Not sure as it was already constructed. Prolly made back more than 40 years ago. If I didn't have access to that I would have purchase some 3"...
I used a section of 3" pipe with gate from a retired machine shop.
Whats the verdict?
Good to hear your issue is resolved and you can get back to burning!
Could be a long shot but check the solder connections on the control board where the ESP hooks up. Might need a magnifying glass to inspect for a...
Sounds like the stove didn't auto light. Suspect the burn pot liner needs a cleaning (all holes open).
If the burn pot liner is clean manually...
Verify the hopper lid seal is free of debris and closes tightly. Check the fines box cover for the same.
Do you own a Harmon or a HarmAn?
Pooch is kissed and good to see you again as well!
Glad your burning good.
Here's is a sample from my current bag. Typical of all the bags burned so far.
I would try some other pellets just to be sure. It could be that you have a draft issue.
Welcome aboard!! You know you have to post some pictures of your stove or it never happened right?:)
@Gaddy did you get around to burning some of those Okies?
[ATTACH] They come in varying designs but that basically what it looks like.