Separate names with a comma.
I also never had a problem with creosote and I usually run it on 3 and do the leaf blower every ton.
I have a 2006 Afton Bay on a thermostat and it's cheap one I'm looking for something better.I have it set at 70 and once it hit's 72 it goes into...
This from my 2005 Afton Bay[IMG]
I'm not sure I only had the control panel opened once but there might be jumpers inside.
December 16 will be 6yrs still going on the same burn pot.It's starting to show some wear on the top and a small crack were the ignighter is.
I just replaced my motor and it has the 3 red bushings on it .They feel like they are made out of soft rubber
Thanks for all the help ,I removed the motor and found out the armature was binding gave it a shot of tri-flo and it is running again. My dealer...
I was wondering why clinkers were starting to form and the burn pot was filling up, motor was not turning.Does anybody no what the price of a new...
I just picked up the prowatt 600w inverter and i'm in the process of getting all the wiring together in case there is a power failure.
They are 153.00 for the 600w and 260.00 for the 1000w on amazon
The pro watt is a true sine wave inverter.
Hi ,I was wondering if i installed the inverter in my car and ran a 50ft extension cord to the pellet stove would there be any type of problems?...
Thanks for the help, i missed it.
I just read through both manuals and i could not find any info .
Hi, does anybody how many watts the afton bay draws on startup?
Well i went out today and started the generator to see if the ups would handle it ,no go would not come off battery . I had a lamp and a monitor...
Yes That what i plan on using it for to condition the power coming from the generator.
I have a apc xs1300 that i think the batteries are going,would i be able to use a deep cycle for a replacement and let the ups charge the battery?...