Separate names with a comma.
I picked up this electric splitter ( 5 ton/ 7 ton, not sure which) about a year ago on CL for short $.
I used it quite a bit, split a few cords or...
Try a masonry bit with a carbide tip, not exactly what they are meant for, but they will often cut through hardened steel in a pinch.
I have 2 older model temp alarms, I made these before Aauberins came out with their latest model.
I have a probe in my double wall and TC on the...
I take them apart with a pallet fork, mine is home made but you can buy them.
Then cut them up with a chop saw, goes quite fast, inexpensive HF...
Drill a hole at the end of the crack and fill it with furnace cement and it will probably be fine.
Take a pallet,build a bin, take your wood and throw it in.
I had the same problem.
This is what I did:
No more problem.
Instead of using a stick I use a channel lock pliers to hold the wood.
I use the slats from pallets.
I can still count to 10;)
I experienced the same thing with my magnetic TC ( home made one).
I would read significantly lower than the magnetic or the IR, and did not
If you look on E bay there are some interesting units. They both have 4 channel TC inputs. Don't think the heater meter is what you want....
I don't have that model controller but I have something similar. I put this together before
Auberins started selling the AT type units. I have...
Move ashes to one side, place pan in stove, shovel ashes into pan, remove pan from stove,
cover pan with larger pan, take outside.:)...
I have one of the electric splitters not, HF but similar. I got mine off CL for short money.
They work surprisingly well for what it is. I split...
Ready for the cold weather, can't go out without your hat and scarf.;lol
Not hard to do.
Search you tube many vids on gasket replacement.
Played around with the Omega data logger this morning, to see how long the stove took to heat up. Loaded the stove with some pallet wood and...
It is a 10-24 brass slotted head screw with the head turned down flat.
Search for 07270 magnet, amazon E bay etc. has them.
No the TC, brass screw, nuts and magnet were all purchased separately and assembled.
You can make your own magnetic mount TC pretty easily. Alnico magnets are good to about 1000::F, so you should be fine.
The drawback I have...
Learned that you must let the stove cool down BEFORE cleaning the chimney.;em
Tried them once, hated them, felt like I was wearing blinders, narrow field of view.
Wear the regular ones now.
Also I try to pick a larger size...
As someone posted previously, If you can close off the secondary air inlet( may not be possible on every stove) and the primary inlet the the fire...
Here are some pics from this summer of Minna, our GSD/ Husky mix.
We got her about a year ago, wonderful dog.
I have a Omega http://www.omega.com wireless data logger that can send a SMS message to a phone when an alarm occurs. It has a thermocouple...
Make a bin from a pallet and some wire fence.
I break them up with a pallet fork, and use a chop saw with a cheap carbide tip blade, goes right through a nail if you hit one.
Rental property...poorly installed wood stove...what could possibly go wrong?
I have burned tons of pallets, I use them kindling and for getting the fire going quickly.
I like to keep a supply in the basement in case I don't...
Slight correction to the correction
Forgot a 0 should be .016
I was in the same position as you about 6 years ago. My older oil boiler with tank less coil was running about 1 hr/day,
burning 1 gal/day at a...