Separate names with a comma.
Keep me informed. I will inherit one from a family member and he said he had the same problem.
No water, but very dirty glass and weak flame.
OK, imacman, I'll just wait over night. No big deal.
I'm going to get a T installed. I'm done doing this again.
Can I run my pellet stove while waiting for the RTV to dry.
It said it takes 24 hrs to cure.
I've heard you can but I just wanted to ask.
OK, Thanks so much.
I'm actually calling a pellet stove company nearby so see if I can get a T so I won't have to do this again.
This year I...
I don't have a T clean out so I have to remove the back pipe from the exhaust to clean out all the ash build up from last season...I know...
Sorry to post to an old thread, but I also had convection blower sound issue.
It was very high pitch. Almost like something was hitting the...
I notice that the build up happens more often when the as pan is more full.
I do scrape it out in the evening before bed after it cools, but...
Any Updates on this post?
After a about 4-5 days I have lots of ash in my burn pot as well.
I'd like to know if the new liner made a difference...
I am wondering if we can start a thread (maybe this one)?
Model: Enviro Meridian FPI
Magnehelic Gage on High = .17 wc
Magnehelic Gage on...
I ended up changing out the convection motor and all is well.
Also I'm using Dry Creek this year.
Much less clinkers....
What brand and name did you use for the Silicone?
Where can I find it?
Hahahah, Thats exactly what I did!!!
Great minds think alike :-)
Thats exactly what I did to get it back on the flange and the two bolts.
But the previous Convection blower had it attached...
Sorry, I purchased the Gasket off Ebay.
Its a Cermic Fabric I believe that will need to be bonded to metal.
It does have 4 holes for bolts....
Last year we went through 600 gallons of Oil for heating and Hot water (direct fired oil) heater.
Our house is built in the late 1980's and...
I want to attach a cermic gasket to the convection blower.
What type of silicon do I need.
Can you guys put it in a name brand and type that...
I had the Arilaire 700 installed in my duct work last week.
I had them install the digital humidistat that has the probe for the...
Man, at first I thought I was looking at an Iphone screen shot.
Very cool. I will ask the HVAC guys when they get here on Friday...
What do these things run price wise?
I guess I should buy local otherwise I won't get support.
Any other pointers?
Can you explain what you mean by the upgradted integrated thermostat?
That sounds ideal.
I have to go in to the basement and switch...
I called my heating contractor, and went with the Aprilaire 700 with digital humidistat.
Install is Friday.
I do have a wire system.
Was thinking about the whole house humidifier today.
If I run it without the furnance running, won't the humidity condense on the cold metal...
What model Humidifier did you end up with? I've been researching all over, and the reviews are kinda mixed. Also how many sqft are...
I have oil forced air and we also use a pellet stove in the family room.
The room with the stove has a vaulted celling with a celing fan.
I have an Enviro Meridian Insert and it heated the rooms well, but hard to move the heat.
The room with the stove has a cathedral celing :-(...
Solved the problem.
Actually in the read of the axle of the convection blower there is some type of bushing or washer. That...
I looked for the reostat, but didn't see it on the circuit board. Its a Meridian FPI. We purchased it in 2007, but didn't install...
Here is my update.
I removed the convection blower, cleaned out all the dust from the fins of the fan, cleaned out the inside duct of the...
Thanks for the quick replies. I'll have a look at it by Friday and see.
Knowing that .22 or so is a good setting makes me feel...
I have two things going on with my Meridian FPI.
1. I have a Mag gauge and tried the .11 WC on HIGH in the book, but I always get clinkers....