Separate names with a comma.
Where did you get this info?
Yup. Halve, or quarter and load.
Like a pick-up truck? Or maybe a trailer?
Hinky? I thought that was west coast terminology .....via Adam 12.
I am currently dealing with the tenacity of hickory coals. Wood is at 16-18%
We recently picked up an 8qt. stainless thick bottom for 20 bucks at target. Not sure what you have up in canukistan.
Get one with an extra thick bottom (like an extra piece molded on). It will be a lot quieter,..... the thinner the bottom the louder they get.
Go at it with some CLR or Limeaway the next time you let the stove cool.
What saw? IS the chain Vangaurd? Get a Husqvarna filing guide kit. With said kit you can keep a chain cutting BETTER than new until the cutters...
A tip would be to do the dollar test first to see where the fit is good and loose and make note. The gaskets are woven and will fatten when pushed...
A lot of the "hearing protection" radio muffs suffer the problem of not being loud enough to hear talk/music radio over the equiptment your using.
I've split blow down cherry in april and it was 18% in oct.
Go for a 30 unless you're trying to put it in closet.
When your cats shed more in the winter than summer.
Tile on the hearth and cover the vertical brick with stone veneer. Of course then a better looking stove.
We have two of the full size floor models (733). Modified them so they blow across the floor instead of up at an angle with some screws and vinyl...
Dang, pulled out a D&D reference. Long live Gary Gygax
I have mine in a just under 26" tall opening. Lost 4 something inches from the pedestal, including ashpan and OAK box. Welded 4 small steel...
High carbon steel.
He's actually a member over on AS.......he took a lot of s*%t for those vids....he's learned a lot since then.
Best out there.
Lets not forget the mighty Orley
This will probably go against the grain, but between the two, the 455 w/18" for sure. Get a better chain and keep the vanguard for dirty work. You...
Sorry for the delay in response, just got back from the coast. As for the model you have, I'm going to assume we're talking about a barrel shaped,...
Nothing wrong with that music==c
HF impact sockets are fine. Not made in China, but Taiwan, where a lot of quality sockets are made./
uhmmm , 64cc, but yeah 20-24
You can do some modest mods yourself and get some respectable gains FOR FREE. A lighter saw making more power and cutting faster is a good thing....
Pretty sure 40% gain is in cut speed not HP. By changing port timing you can gain hp, tq, and rpm. A 70cc saw won't automatically cut faster than...
I heat 1400sqft upstairs w/30-nc. I like it warm when it's cold out. I like waking to 73* and a box w/plenty-o-coals. Get the blower too, it adds...