Who said anything about putting the coil on the outside of the pipe? QUOTE; "I may just go with a coil inside like BLIMP suggested." I do have some...
The forge burns propane, 250,000BTU. Brian, I am familiar with a heat exchanger that uses tubes like you refered to. I can build anything as I have a...
My forge runs about 2800 degrees inside. There are no fumes or smoke and the only dirt is dust in the shop air. I am sure I would have it clean a...
I have a 250,000 BTU gas forge in my shop that produces a LOT of waste exhaust heat. I have a hood over the forge ducted into a 12" pipe with a 1/2...
Hydraulics are slow. The Supersplit is the fastest splitter out there. It will let you split more wood with less gas quicker by yourself that three...
I have a Jotul 602 with a small firebox. When I am home I burn a small hot fire adding one piece of wood about every 1/2 to 1 hour. At night I pack...
There is no catalyst. Its a brand new stove. The stove has a damper (slider) at the bottom for combustion air and a damper (slider) at the top that...
I have an older Jotul 602 that puts out a lot of heat. There is no built in flue damper so I use a stove pipe damper. My sister has a new Jotul F3...
Some questions I have are; how much rise should I maintain to get good flow? I know the steeper the better, but what would a minimum pich be? Will...
Hello all, This is my first post here. I am planning on building an OWB and want to use a gravity feed to circulate the water. My OWB design will be...
Separate names with a comma.
