I burned 90% of a ton of Envi-blocks and about 1/2 cord of pallet wood....this is my first season with a stove. My fire goes from 5PM till 10AM each...
Found a great deal on a chop saw for cutting up pallets at Home Depot. $59.99 out the door price comes with a 10 inch carbide tipped blade. Its...
FWIW...while burning biobricks I was very carefull about stacking to limit airflow etc but they still burned very hot. What I observed is that as...
Burning configurations i use: **** Average burn **** Stove pipe damper - Open full Stove top damper - Closed Stove Primary Air - Closed 100% Wood...
I have a ton of envi blocks in my basement (well 3/4 ton now)....i am very happy with them. I bought several packs of biobricks to test out the...
My cordwood is too green for me to get decent performance from my stove so I bought a couple packs of biobricks. I thought they burned fairly...
Had a decent weekend burning my stove and I learned a couple things that I thought might be helpful to others. I had excellent success getting an...
Update for you all. Last night I burned only with biobricks in an effort to eliminate firewood from the equation. Started a fire with 4 biobricks...
my setup has no single wall pipe....
My setup is a mostly indoor 15 foot steel chimney straight up only 3 ft of it pokes up thru the roof (12ft class A and 3 ft of double wall pipe). I...
I'm really getting frustrated with this stove. Last night I spent about an hour and burned quite a lot of wood to get the stove surface up to 625...
My 4 hour burns are with the top damper closed and the primary air closed. I did tighten up the doors a little and looked for leaks. I don't think...
Does having the stove in Everburn mode improve burn times or does it just produce more heat? I'm having issues getting Everburn to stay lit and can...
My stove seems to be the exact opposite. My stove temps almost never exceed 425 degrees, but the stack temps get very hot. As the stove dies down...
I would say this is not how I normally run the stove. Typically it runs about 300-400 stove top with 500-600 stack temps...fully closed up with a...
Question on what are a normal range of temps on this stove. Been playing with biobricks and sort of getting to know the stove...kinda new. I have a...
Just got my stove installed, completed some break-in burns and i'm ready to go. My goal is to vastly reduce the amount of oil that I need to buy. I...
Separate names with a comma.
