So I recently ran out of pellets, I was burning Genevas for the past year or so. Went down to the local tractor supply and samped a few bags of some...
hey folks, thanks for the replies. Sounds like we are mosty in agreement on the pellet snappage causing the clunk. not a big deal. There is very...
Hello pellet folks, So ive run into a couple of issues as of late that I'd like to pick the collective pellet community brain about. The stove is a...
I agree with the soft butter texture. most of the junk just cleaned off with a paper towel. well it seems though that a re-occuring theme is the low...
hello fellow pellet admirers, Did a solid cleaning on the stove today, Harman P61A, and noticed something very different than last year. I had...
I have the same model stove P61A. Mine does the same and produces a dull thud here and there. I was thinking the same that something temporarily held...
I get a little nervous about burn back through the screw when I turn the stove off. The last few pellets burn at the base of the burn pot and the...
Looks like this conversation got into slightly more than exhaust venting. Thanks for the replies on the passthrough kit. The sleeve is right up next...
wildlife biologist. and part time tin knocker for an HVAC company. gotta pay the bills. you guys know what I mean.
"so even if the shield is right up against a stud, the stove will temp out and shut off before that much heat ever comes down the pipe, let alone get...
I imagine I was just being super paranoid and getting all worked up over nothing. appreciate the feedback. that settles the nerves a bit. My pass...
whats up guys. so I moved my harman P61A up onto the first floor of the house this year and installed the harman wall pass-through kit. I installed...
I just bought the little single outlet surge protector from Home Depot. I believe its made by Belkin. Has 2 led lights on it for "protected" and...
Thanks for the replies everyone, It seems from everyones replies that the OAK certainly doesn't hurt to have it installed. It makes sense to be...
Hello Forum, This is my first post to this site. I've done a fair amount of reading so far, and it seems like a great collaboartion here....
Separate names with a comma.
