Our F500 vermiculite baffle developed a crack down the center, front to back last winter and I finally got around to ordering a new one. When we...
Our house is an all electric, 1500 sq. ft., 1968 built ranch with a full concrete foundation basement that footprints the main floor in square...
I just experienced this occurrence last week and I have already found this thread http://www.hearth.com/econtent/index.php/forums/viewthread/88611/...
I am trying to understand if copper sheet metal could be harmful to use only 6"-8" from a wood stove to cover a fireplace opening. Are there any...
We are planning on installing hardwood floors throughout the house as time and $$$ permit, but the carpet that we bought the house with is old and...
We have just hit the 1 year anniversary of our Matt Black F500 and we absolutely love the performance out of her. Thanks to this site and all the...
I have searched for other posts regarding this occurence and found that it is quite common on a couple other manufacturer's stoves, but I have not...
I worked out a fantastic deal with a local arborist to drop off any clean hardwood, deciduous logs whenever they are in the area (for their...
I have been running our Oslo up to 500-550 and then adjust the air control down in quaters every 10-15 minutes resulting in just around about 1/4...
I have masonry chase lined with 6" SS rigid (about 17' of pipe from cap to collar) with two <45 degree bends passing through the smoke chamber/damper...
I have run into a bit of differing opinions on two subjects regarding my rigid single wall liner: Somewhere in the NFPA 211 it is stated insulation...
I just found some interesting info on venting the top flashing or top plate region when installing a stainless liner into manufactured chimneys. In...
I am almost ready to rough everything in for inspection (inspector wants to do a rough in inspect) of our F 500 but have one more component question....
We are chasing an exterior wall, clay flue masonry chimney with insulated 6" single wall SS pipe for a Jotul Oslo that will be rear vented. Measured...
I have seen this done on a few installs and we are planning on doing the same in our house. A couple threads that show an example of what I'm talking...
Recently, in another thread I found some great help in deciding to purchase an Oslo for our home. Now that I am on track for the stove, I am looking...
We are located in north central Illinois and our house is a late '60s built, 1500 sq. ft., single story (8' ceilings), fairly open layout and we are...
Separate names with a comma.
