i called sbi yesterday for the reset code. thanks anyways
i had a strong feeling that this was all it needed. its going to get in the -30's for the rest of the week so im glad its fixed early.
i called sbi for the reset code for H1 and it is as follows in this order one at a time. reset, I/O, 6, 1, quiet mode for aprox. 3 sec. this should...
when i unplugged either the l250 on the auger or the reset switch, the stoves fans started to run but the auger didnt. after i plugged the others...
i never disconnected the 160, but when i did there was no change
the 160 switch is located on the control panel box. when unplugging the other switches, the auger still doesnt turn but the fans are all working....
when i jump them the same thing happens. only when one is unplugged the fans will start up. it seems like it still has something to do with...
i dont have a continuity tester but the jumper should be a good indication
i did like you said but nothing happens. im still working on it. if you find anything out as well, let me know
the wires hanging is still unattached from my troubleshooting
here's those pics
i have the same manual. its not were the arrow is pointing. there is a swithck on the fan housing. the left arrow of the L250 would more acuratley...
i think i found the reset switch in a different location. it didnt apear to be thrown but i pushed, and pulled it with no movement. i unplugged one...
i looked for the switch but could not find it. my manual shows were it is supposed to be located but it is not there. maybe it is an older manual....
i will try it. thanks
i tried pressing and holding both hi and lo with no results.
hi everyone. i was running my drolet eco 35 on hi for awhile and the stove gave me the overheat code H1 and shut down. it was time for a cleaning...
Separate names with a comma.